Worldwide Automobile Production Without China Has Been Stagnating for Eight Years - New Quest Report
The new report makes the influence visible China exerts on the development of the world automobile production. The report enables a realistic view on the future of world automobile production. - August 31, 2016
Dynamic Growth of Robots’ Use at Machines Until 2018 - New Quest Study
Current robot users will dynamically expand the use of robots at the machines combined with much differentiated engineering according to the new market survey from Quest TechnoMarketing in the German machinery industry. - November 20, 2015
New Tendencies in the Internationalization of Automobile Production - New Quest Reports
The new reports in the Quest Trend Magazine identify three new tendencies in the internationalization of the worldwide automobile production. Beyond that the worldwide auto production since 2007 is recorded without China leading to surprising result. - October 30, 2015
Automobile Production in Germany May Overcome in 2015 the Current Sideways Range Only to Glide Into a New One – New Quest Report
The new Quest report finds three features for automobile production in Germany in the first half-year 2015 deducing the outlook 2015 from them. - August 28, 2015
More Than Two Thirds of All Packaging Machines in the European Union Coming from Germany and Italy - New Quest Report
The value of packaging machines, produced in the European Union 2014, accounts for €11.6bn. The individual European Union-countries are showing very different market shares at these values, as the new Quest report points out. - August 19, 2015
Trend to Value-Added Packaging Machines with Declining Production – New Quest Report
The new Quest report highlights five characteristics of the packaging machines industry in the German machinery industry covering besides production and export markets the growth expectations of the packaging machine-builders. - August 07, 2015
Production and Sales of German Machinery Industry Will Remain Caught in Their Sideways Range in 2015 – New Quest Report
Production of the German machinery industry has been swinging up and down, showing neither an upward nor a downward trend, describing a trendless sideways movement since 2011 and so in 2015. - July 17, 2015
Crisis Indicator in German Machinery Industry Above Pre-Crisis Level for the First Time – New Quest Report
The new Quest report specifies the crisis indicator, analyzes its course since the world economic crisis and applies it for six company size classes. Its results are different as obvious suggestions. - July 02, 2015
The Dramatic Internationalization of Automobile Production – New Quest Report
The new report in Quest Trend Magazine proves how leading the carmakers have been internationalizing their production since the year 2000 and which level is currently achieved. - June 17, 2015
Difficult Economic Outlook for German Machinery Industry - New Report in the Quest Trend Magazine
The new report on basis of the current numbers of the Federal Statistical Office put the outlook for the German machinery industry into the context with its worldwide export markets. - April 15, 2015
Latest Feedback of the German Machinery Industry on Industry 4.0 - New Report in the Quest Trend Magazine
Along the market survey from Quest TechnoMarketing about the engineering of the machine automation until 2017 the machine-builders also assessed “what Industry 4.0 is supposed to mean for the engineering of the machine until 2017.” - December 01, 2014
The Role of Software Solutions as Competitive Advantage for the German Machinery Industry Reveals Quest Trend Magazine
The new report in Quest Trend Magazine reveals that software solutions as competitive advantage are playing a differentiated role for the machinery industry. The results are based on the new market study from Quest TechnoMarketing. - November 21, 2014
The Dramatic Internationalization of the Locations of Worldwide Automobile Production - New Report in the Quest Trend Magazine
Dramatic shifts in the market shares of the individual countries have been determining the worldwide automobile production since 2000. The new report in the Quest Trend Magazine makes this visible using up-to-date data. - September 26, 2014
Sales in German Machinery Industry Slightly Above Multi-Year Average in July 2014 – New Report in the Quest Trend Magazine
The report puts sales in July into the context of the six-year-old development since 2008. This long-term analysis identifies structures and prospects that may disappear in comparisons with previous years. - September 17, 2014
Structural Changes Determining the Outlook for Worldwide Industrial Production - New Report in the Quest Trend Magazine
Quest Trend Magazine’s new report puts the worldwide industrial production in the first half-year 2014 into the context of structural changes that emerged in the last 15 years. - September 05, 2014
Current Trends and Outlook for Production and Sales of the German Machinery Industry in the First Half-Year 2014 Reveal the Quest Trend Magazine
The Quest Trend Magazine has recently published an analysis that evaluates the course of production and sales of the German machinery industry in the first half-year and provides the outlook that can be expected. - August 20, 2014
The Use of IO-Link in The German Machinery Industry Until 2016 Reveals The Quest Trend Magazine Study
Most machine-builders using IO-Link are really content with it. The use of IO-Link will boost up to 2016. These are some results of the new Quest study, represented in the Quest Trend Magazine. - August 15, 2014
Concentration and Variety - 15 Years of Market Shares of Servo Suppliers in the German Machinery Industry Reports the Quest Trend Magazine
A new survey made by Quest TechnoMarketing shows how servo suppliers’ market shares in the German machinery industry developed from 1999 to 2013. - January 22, 2014
The Market Shares of Ethernet and Real Time Ethernet Until 2015 in the German Machinery Industry - New in the Quest Trend Magazine
The Quest Trend Magazine has published the market shares of real time Ethernet from 2005 to 2012 and the planning of the machine-builders until 2015. This concerns EtherCat, Ethernet IP, Modbus TCP, Powerlink, ProfiNet, Sercos III and VARAN. - December 11, 2013
How the 10 Largest Automakers Have Internationalized Their Production - New from the Quest Trend Magazine
Since 2000 the production shares of the 10 largest automakers in the 10 largest car countries have been changing in such a way that four out of ten manufacturers do not produce any more the most automobiles in their home land. - September 13, 2013
Safety Ethernet in the German Machinery Industry Until 2015 - New Quest Study
Currently 33% of the machine-builders are using Safety Ethernet but Safety Ethernet is being implemented at just 6% of the machines. - September 04, 2013
The Dramatic Internationalization of the Locations of Worldwide Motor Vehicle Production Since 2000 - Quest Trend Magazine's New Research
The market shares of the individual countries at worldwide automobile production have been dramatically changing in the more than 10 years since 2000. Quest TechnoMarketing made these changes clearly visible and published them in the Quest Trend Magazine. - August 28, 2013
"Rare Earths and Automation Technology" – New Quest Research
The unstable supply situation with rare earths has specific causes. Quest Research publishes 7 theses in order to look behind the scenes trying to make an objective and useful orientation easier for manufacturers and users of automation technology. - August 02, 2012
How the World-Wide Automobile Production Internationalized from 2000 to 2011 - New Quest Research
The new Quest Research reveals the dramatic shifts in the market shares of the automobile countries and manufacturers since the year 2000. - June 07, 2012
"What the Machine-Builders Want to Change in the Automation Technology in 2012" - New Quest Study
The new Quest study covers the current changes of the German machine-builders in regard to Ethernet and field buses at the machines, the control technology, the drive technology, IO-Link and RFID. - May 17, 2012
"The Future of the Robots' Use to 2014"- New Quest Study
The new Quest study determines the robots' use at the machines in the German machinery industry until 2014. - March 20, 2012
Increasing Use of Robots in the German Machinery Industry 2011, Quest Study Reports
19% of the investigated machine-builders intend to change the use of robots at the machines this year according to the Quest study: "What the machine-builders want to change in automation technology 2011." - July 13, 2011
IO-Link Has Been Continuously Growing in the German Machinery Industry Since 2007, Quest Trend Magazine Reveals
The implementation of IO-Link shows neither an erratic upward development nor a tough stagnation but a continuous, step by step spreading with more and more machine-builders in more and more sectors of the German machinery industry. - May 26, 2011
Real Time Ethernet is the Pacesetter at Packaging Machines to 2012 – Quest Trend Magazine Reveals
Packaging machines belong to the pacesetter for the use of Ethernet in the German machinery industry. 83% of the packaging machine-builders already used Ethernet exceeding the reference value of 80% in the total machinery industry in the year 2010. - May 18, 2011
New Focus on Criteria and Solutions Selecting the Right Energy Efficient Drives in the F&B Industry
The Quest Trend Magazines has created a new focus on the criteria and solutions to assist the current decision-making process in the F&B Industry regarding changing the drive technologies. - July 28, 2010
Current Fine-Tuning of the Control Technology is Used for Determining for the First Time in the German Machinery Industry Reports the Quest Trend Magazine
Fine-tuning the consisting control systems at the machines instead of changing the control technology is the motto of the German machine-builders this year. These goals pursue the machine-builders for the first time since 2003. Since then the annual technological change in the automation... - July 14, 2010
Quest Trend Magazine Reveals the Current Requirements on Sensors in the German F&B Industry
The type of the sensors’s protection ranges from IP 54 to IP69k, special applications need high-grade steel versions and special cable jacket for the sensors’ connecting cable is demanded. - June 23, 2010
Quest Trend Magazine Reports the Current Trend to Application-Optimised I/O Modules in the German Machinery Industry
The German machine-builders are intensified interested in application-optimised I/O modules this year. This confirms the trend to fine-tuning the control and drive technologies that determines the changes in the automation technology this year. - June 17, 2010
Panel PC Benefits from the Current Trend to Fine-Tuning the Control Technology in the German Machinery Industry
Machine-builders in Germany prefer fine-tuning the control technology this year. The Panel PC benefits from this current trend. - June 10, 2010
Quest Trend Magazine reports how the German Machinery Industry is changing to Ethernet-based field buses this year
Change to Ethernet-based field buses in the centre of interest in the German machinery industry - May 26, 2010
Trends in Automation Technology from Users’ Point of View - Now on the Internet as Well
The Quest Trend Magazine publishes trends in automation technology from user’s point of view in machinery industry, automotive and F&B industries in Germany. Complementary to the print edition an on-line edition on its own has been published in German and English language. The Quest... - May 19, 2010