New Adjustable Clamping Lever from FDB Panel Fittings
The new 6-141 adjustable clamping lever from FDB Panel Fittings is suitable for short-term location of workpieces or frameworks which require frequent manual re-setting. - September 21, 2016
New IP65/IP67 Compression Latch from FDB, with Protective Cover Flap
The new DIRAK 1-075 compression latch from FDB Panel Fittings offers IP65/67 protection and status visibility by virtue of its zinc die cover flap which only closes when the latch is fully compressed. The flap also provides additional protection from ingress of water and dirt projected at high... - September 02, 2016
Surface Mounted 120° Door Hinge with Secured Hinge Pin from FDB Panel Fittings
The new 4-124 120° concealed hinge from FDB Panel Fittings is designed for surface mounted doors on specialist enclosures and cabinets where it enables easy door removal/re-fitting without loss of the securely retained hinge pin. Service, maintenance or repair of equipment may be carried out... - July 16, 2016
New Vibration Isolator from FDB for Equipment Mounting
The new Harter F100 damper from FDB Panel Fittings isolates delicate machines and instruments from external vibration. - June 30, 2016
New Giussani Reprogrammable Quarter-Turn Lock from FDB Panel Fittings
The new Giussani reprogrammable quarter-turn lock from FDB Panel Fittings provides users the flexibility to update keys or switch users so that staff changes or lost keys may be easily accommodated. - May 15, 2016
New Illuminating Indicator for Quarter-Turn Locks from FDB Panel Fittings
The new DIRAK LED module from FDB Panel Fittings provides users with a flashing red alert on quarter-turn locks to indicate an “open” status, so addressing problems of doors being left fully or partially open. Of course this is especially obvious in low light conditions acting as a... - May 01, 2016
New Multi-Point Compression Lock System from FDB Panel Fittings
The new compression rod latch from FDB Panel Fittings facilitates a multi-point 3 or 5 point system with 4mm clamping at each latching point. It will be suited to large electrical and electronic cabinets in outdoor or internal wash-down areas. - April 15, 2016
2 Stage Hinges for Flush Doors Now Available from FDB Panel Fittings
These new 1042/3 2 stage hinges from FDB Panel Fittings provide a full 180° door opening for removable flush doors on large or small cabinets, with two sizes to suit industrial enclosures and electrical housings. - April 13, 2016
New 180 Degree Polyamide Hinges from Specialists FDB Panel Fittings
FDB Panel Fittings have introduced the EMKA 1110 polyamide hinges to their range. These hinges permit rapid door mounting and demount by use of a removable hinge pin which also locks the hinge into place and are considered suitable for batch or continuous production of specialist enclosures. - March 04, 2016
Stock and Staffing Expansion at FDB Panel Fittings
FDB are now stocking hundreds of new products, as well as additional stock of popular items serving the specialist panel builder and vehicle transport industries with locks, handles, hinges, cabinet sealing and other enclosure hardware in zinc die, reinforced plastics and stainless steel. - January 16, 2016
FDB to Display Cabinet and Enclosure Hardware Accessories at Southern Manufacturing 2016
FDB Panel Fittings will display their range of cabinet and enclosure hardware accessories for the specialist panel builder at the Southern Manufacturing Exhibition in February 2016. On display will be ¼ turn locks, stainless steel hinges, compression locks, as well as wing and T handles. - December 24, 2015
Giussani Pop-Out T Handles from FDB Panel Fittings
The new Giussani pop-out T handles from FDB Panel Fittings incorporate radial pin tumbler locks and offer the benefits of security with a traditional T style format, now updated to meet modern security and safety concerns. - December 13, 2015
Giussani Tumbler Lock Pop-Out T Handle Now Available from FDB Panel Fittings
The new P5P and sister P5GP Giussani Pop-out T handles from FDB Panel Fittings offer enhanced security and safety over the traditional T configuration, while retaining the same convenience and integral key tumbler lock system. The recessed handle minimises vandalism opportunities and its low... - November 05, 2015
FDB Hinges and Compression Locks Solve Storage Access Problems on Nippi Wheelchair Trike
Hinges and locks from FDB Panel Fittings improve the convenience and sealing of the storage compartments on either side of the wheelchair accessible Nippi Trike. - October 01, 2015
New "Crown" Key IP65 Lock from FDB Panel Fittings for Telecoms Applications
The new Giussani NIA102 quarter-turn IP65 lock from FDB Panel Fittings is intended for switchboard and other telecoms applications such as racks, including outdoor applications where its IP65 protection is appropriate. - September 18, 2015
1110 Quick-Fit 120° Hinge from FDB Panel Fittings for Lay-on Cabinet Doors
The robust zinc die 120° hinge from FDB Panel Fittings enables panel builders to quickly install a removable 25mm return door with electrical safety compliance using just 2 off vibration proof screws and a retained hinge pin system. - August 29, 2015
Small Format Swinghandle from FDB Panel Fittings for Enclosures and Smaller Cabinets
The new small form factor 1150 program swinghandle from FDB Panel Fittings is suited to enclosures and smaller cabinets where door space is limited but IP65 sealing is required. - August 15, 2015
Lift-Off Butt Hinges Now Available from the FBD Online Store
60mm butt hinges for wall mounted enclosures or other cabinets and access panels are now available ex-stock from the FDB Online Store. - June 12, 2015
Quarter-Turn Wing Handles from FDB Online
Quarter-turn wing handles for enclosure doors are now available ex-stock and online from FDB Panel Fittings. These wing handles are offered as components or pre-assembled for direct installation into an industry standard panel cut out in L or R hand application. - May 03, 2015
Swinghandles Now Available Online from FDB Panel Fittings
FDB Panel Fittings have made a wide range of swinghandles available ex-stock and online. The range includes locking and non-locking versions in polyamide, zinc die and stainless steel with sealing up to IP65. - March 21, 2015
FDB Panel Fittings Puts the L Handle Online
FDB Panel Fittings now have L handles for specialist cabinet manufacturers available ex-stock and online from their online store. Many types and sizes are offered with/without locking options or with padlock facility. - February 28, 2015
FDB Panel Fittings and FDB Electrical Exhibiting at Southern Manufacturing 2015
FDB Panel Fittings and FDB Electrical will be on stand X121 at Southern Manufacturing 2015 exhibiting enclosure related products, including locks, hinges, swinghandles and panelware, along with electrical protection products such as RCDs and Earth Continuity Monitors. - January 10, 2015
Traditional T Handles Now Available Online from FDB Panel Fittings
Traditional T handles are now available ex-stock, online from FDB Panel Fittings for specialist cabinets, enclosures, furniture and vehicles in sealing levels up to IP65. - December 20, 2014
Recessed Handles Now Available Online from FDB Panel Fittings
Recessed handles from FDB Panel Fittings for cabinets, cupboards, storage and luggage are now available online. - December 05, 2014
Bridge/Pull Handles Now Available Online from FDB Panel Fittings
FDB Panel Fittings have now made their bridge handles available online from stock. The range includes aluminium, polyamide, zinc die, steel and stainless steel types in front or rear mounted styles. - November 16, 2014
FDB Online Shop Includes IP65 Stainless Steel L and T Handles
IP65 L and T configuration door handles are now available in stainless steel from the FDB online store. Standard versions include quarter-turn non-locking or locking. Quarter-turn lever handles for padlocking are also available, as is an anti-vandal swinghandle type for profile cylinders and flat rods. - October 25, 2014
72 Series Aluminium Spring Hinges from FDB Panel Fittings with Friction or Detent Design
The new 72 series aluminium spring hinges from FDB Panel Fittings have a concealed spring, butt type design and black or clear corrosion resistant anodised finish. The hinges will suit doors and opening panels in environments from domestic to office and industrial. - October 11, 2014
New Adjustable Stainless Steel Multi-Angle Lid and Door Stay from FDB Panel Fittings
The new adjustable multi-angle lid and door stay from FDB Panel Fittings enables locking of a lid or door in multiple positions by use of a manually sliding lock lever. - September 03, 2014
FDB’s "Black Torpedo" Hinge for Enclosures and Cabinets
FDB Panel Fittings now have their popular torpedo hinge available in a “Black” version. These torpedo-style hinges are widely used for electrical cabinets and enclosures, allowing doors to be quickly mounted or removed from frames. - July 31, 2014
New IP65 Compression Latch from FDB Panel Fittings Offers Inconspicuous Security
The new IP65 compression latch from FDB Panel Fittings will integrate seamlessly into virtually any enclosure design and was developed to minimise attack points for prying tools making it vandalism safe. - July 18, 2014
FDB Panel Fittings Speeds-the-Way to Rugged Cabinet Hardware
FDB Panel Fittings supply rugged SNAPLINE hardware under their Rocfast program to complete all-terrain mechanics tool cabinets for Argon Welding Ltd. - June 29, 2014
New FDB Online Shop for Panel Fittings and Electrical Products
A new FDB online shop features the wide range of products available from FDB Electrical and FDB Panel Fittings. The shop covers FDB Electrical power distribution and circuit protection enclosed units, as well as items such as cabinet locks/components, hinges, handles, sealing gaskets and rod lock mechanisms from FDB Panel Fittings. - June 01, 2014
New Tamper Proof Concealed T Handle from FDB Panel Fittings
The new padlockable 3-145 eject and turn T handle from FDB Panel Fittings is tamper proof and offers water and dust protection to IP65. The design and layout of the T handle, in combination with the very narrow gap dimensions, make this handle resistant to tampering, and in addition the low profile... - May 17, 2014
FDB Panel Fittings Highlight New Hinge Calculator Tool
FDB Panel Fittings, together with their sales partner Dirak, have now provided a hinge calculator tool which will determine the load bearing capacity of a hinge/door installation. - April 26, 2014
FDB Panel Fittings Help Select Your Continuous Hinge
The latest knowledge base downloadable document from FDB Panel Fittings covers the specification of continuous hinges, often known as piano hinges. - April 10, 2014
FDP Panel Fittings Launch New "Food and Medical" Stainless Steel Quarter-Turn Lock to IP69K
FDB Panel Fittings have launched their hygiene quarter-turn lock in stainless steel specifically designed to meet the needs of both the food and medical industries. - March 30, 2014
New Product Guide from FDB Panel Fittings – Hinges Knowledge Base
This free download guide from FDB Panel Fittings on hinges and their use has a range of useful information covering modern developments, materials, opening characteristics, mounting, load bearing capacities and common types used in the electrical and electronic enclosure industries. - March 16, 2014
New Latches from FDB Protect Against Vandalism and Theft
Two new anti-vandalism handles from FDB Panel Fittings for the protection of enclosures against theft of contents and general vandalism. - March 02, 2014
FDB Rocfast and SNAPLINE Enclosure Locks – Right Product, Right Time
The Rocfast Program from FDB Panel Fittings with SNAPLINE enclosure locks saves time and money. - February 01, 2014
FDB Panel Fittings Gives Guidance on Multi-Point Locking
FDB Panel Fittings have recently issued a knowledge base guide which covers Multi-Point locking for secure latching of doors. Pre-assembled and bespoke systems are addressed for swinghandles, quarter-turn handles and quarter-turn locks. - January 10, 2014
New Product Guide from FDB Panel Fittings Details D-Snap Technology Fittings
The latest Knowledge Base guide from FDB Panel Fittings covers the innovative D-Snap technology employed in the SNAPLINE range of enclosure hardware. The downloadable guide covers an explanation of the technology with a description of the major product types available. - December 22, 2013
FDB Panel Fittings Serves T Handles, Locks, Hinges and Cams “To Go” on the Bus Stop Bar
Under their Rocfast banner FDB Panel Fittings has supplied the Bus Stop Bar with locks, handles and hinges. The Bus Stop Bar is a mobile hospitality platform used at venues around the country. - November 30, 2013
FDB Panel Fittings Gas Struts Knowledge Base Guide
The Gas Struts Knowledge Base Guide is now available from FDB Panel Fittings with information on applications, operation, key selection criteria, force characteristics, life expectancy and standard sizes/rod ends etc. - November 16, 2013
FDB Rocfast Offer Corner Gasket Solutions
FDB Panel Fittings, under their Rocfast service banner, are offering preformed mitred-and-joined frames to fit custom cut-outs on a bespoke and pre-assembled basis. These frames incorporate right angled joins or other angles to suit cabinet frames or door cut-outs for access covers. - November 10, 2013
FDB Panel Fittings Rocfast Lock Assembly Service Now Offers Up to IP67 Sealing
FDB’s Rocfast lock assembly program saves time, money and mistakes by guiding customers through the process of specification, component matching, ordering, assembly, packaging and logistics. Now it covers the extra sealing requirements of high degrees of dust and water protection up to IP66 and IP67. - October 19, 2013
New Heavy Duty Hinges from FDB Panel Fittings for Railways, Garage Doors, Gates and Agricultural Equipment
Forged steel and stainless steel hinges from FDB Panel Fittings for use on railway rolling stock and trackside enclosures. They are also expected to be suitable for garage doors, gates and agricultural equipment. - September 29, 2013
FDB Panel Fittings Joins F1 with FAST
FDB Panel Fittings will exhibit their range of enclosure and transport vehicle related hardware at the FAST Exhibition to be held on November 7th at the Williams Conference Centre in Oxfordshire, home of the Williams F1 Team. This prestigious venue was originally the Williams base for its Le Mans... - September 07, 2013
New Compression Locks Guidance Sheet from FDB Panel Fittings
FDB Panel Fittings share their expertise with a knowledge base data sheet to cover the area of compression locks with guidance on double-action quarter turns and lever actuated latches. Also clamping ranges and types of key. - August 16, 2013
Heavy Duty Spring Hinge from FDB Panel Fittings
New aluminium spring hinges from FDB Panel Fittings for the spring closure of heavy metal doors, metal furniture and heavy panels. - August 02, 2013
Aluminium Profile Spring Hinges from FDB Panel Fittings
A new range of aluminium profile spring hinges from FDB Panel Fittings for the self-closure of doors or access panels in factories and offices, on vehicles, on machine tools or integrated into metal furniture or medical equipment. - July 18, 2013