1000k System Specification of Solar Hybrid Inverter by Dr. Solar

The site has complete details of the products specification. Mr. Harsha says that being the Solar Hybrid Inverter Manufacturers, the company manufacturers 1000k and 3000k system for domestic purpose.

Bangalore, India, September 17, 2014 --(PR.com)-- Recently Dr. Solar has updated its website. The site has complete details of the product's specification. Mr. Harsha says that being the Solar Hybrid Inverter Manufacturers, the company manufacturers 1000k and 3000k system for domestic purpose. For those interested in 1000k inverter, Mr. Harsha explains the specification of the system.

System Rating (KW) | 1 | 2 | 3 | 4 | 5 | 6 | 10(1 ph) |
MPPT Range Open Circuit Voltage |57-100v(VOC=120V)|114-210v(VOC=220V)|140-80v|
Maximum PV Power Recommended (KW)| 1.1 | 2.2 | 3.3 | 4.4 | 5.5 | 6.6 | 11 |
No. of Charger Controller | 1 |
Switching Element | MOSFET |
Controller | 32 bit DSP Controller |
Type of Charger | PMW with MPPT |
Input Supply Phase | 1 Phase, 2 Wire |
Nominal Voltage & Voltage Range | 230 V, 50 Hz |
Battery Normal Voltage | 48 V | 96 V | 120 V |
Grid through Battery Charging Capacity(%KW)| 0-100% |

Other Specifications of the system:
Protection - Under/ over voltage for input output, Array & Battery, Array & Battery reverse polarity. Output overload Short circuit, over temperature, MCCB & Surge Protection at input, output, Array & Battery Path.
Display Parameter - 1. Array - Voltage, Current, 2. Battery - Voltage, Current, 3. Grid - Voltage, Current, frequency 4. Inverter -Voltage, Current, frequency, Inverter heat skin temp, Power (KVA / KW), KWH Units.
Indications - MPPT Charger ON/OFF, Battery on Float, Battery on Boost, Battery low, Battery Charging/Discharging, Grid Switch ON, Inverter Switch ON, Grid ON, Load ON, Inverter ON.
Location - Indoor (Free From corrosive gases & Conductive dust)
Temperature Operating (° C) - 0 - 50 ° C
Max. Relative humidity @ 25 ° C (non Condensing) (%) – up to 95
Max. Altitude above sea level without de-rating - 1000 m (For Higher) Altitude complies with IEC / EN 62040 - 3
Testing - 1000 m (For Higher) IEC 62040 - 3; 61683; 60068 – 2
Active Filter Function - Complies to IEEE 519

These are the specifications of 1000k Solar Hybrid Inverter. For the complete information on the product one should visit the site. If they are interested in the product they can take an appointment through the company site. To know more about the products and for other details visit drsolar.in
Contact
Dr. Solar
Harsha Solar
08040916226
www.drsolar.in
Mailing address: #47, 3rd Cross, Lalbagh road, Bangalore - 560027
ContactContact
Categories