PR.com is a leader in paid and free press release distribution.
To reach journalists, increase online visibility, and attract new customers,
submit via our global online news and press release distribution service to
top search engines, thousands of websites, social media, blogger networks,
as well as via print, broadcast, radio, mobile channels, and more.
The new 1000 program stainless steel L handle from EMKA is designed to accept a padlock for security. Alongside this new L handle EMKA offers an internally mounted 1050 program door or cover stay in AISI 304. - October 06, 2016 - EMKA (UK) Ltd.
New HVF in line visual flow indicators from Elesa UK are a simple, cost-effective means of checking correct operation of many fluid systems and protecting associated equipment. - October 02, 2016 - ELESA (UK) Ltd
The new adjustable cam for quarter-turn latches from FDB enables the correct fit to be achieved on new enclosures or cabinets. - October 01, 2016 - FDB Panel Fittings
Elesa’s new range of circular toothed clamping plates enable accurate positioning of equipment and provide adjustment for the correct angular alignment of instruments, frames, lighting units, disability equipment and similar. - September 22, 2016 - ELESA (UK) Ltd
The new 6-141 adjustable clamping lever from FDB Panel Fittings is suitable for short-term location of workpieces or frameworks which require frequent manual re-setting. - September 21, 2016 - FDB Panel Fittings
EMKA can now offer standard 2 colour pad printing onto swinghandles, drawing pockets, air conditioning handles, drawer handles, L handles, T handles and even hinges as required. - September 08, 2016 - EMKA (UK) Ltd.
The new DIRAK 1-075 compression latch from FDB Panel Fittings offers IP65/67 protection and status visibility by virtue of its zinc die cover flap which only closes when the latch is fully compressed.
The flap also provides additional protection from ingress of water and dirt projected at high speeds... - September 02, 2016 - FDB Panel Fittings
The new VCT-LP lobe knob from Elesa comes with a retaining chain and ensures clamping components need never be lost. - August 28, 2016 - ELESA (UK) Ltd
The new enclosure hardware package from EMKA for air conditioning systems includes quarter-turn handles with lock, heavy duty weld-on or bolt-on hinges and EPDM profile strip. - August 26, 2016 - EMKA (UK) Ltd.
Simple standardised door locks, hinges and sealing strip now available from EMKA for the production of multi-compartment control panels. - August 24, 2016 - EMKA (UK) Ltd.
The new Elesa GFL lobe nut enables adjustment of equipment mounted on threaded stems and may be used singly to lock against another threaded component or in pairs to lock a tubular bracket in place.
The GFL locks brackets etc. in a specific position while enabling quick toolless re-adjustment. Elesa’s... - August 13, 2016 - ELESA (UK) Ltd
EMKA provide door panelware and security for server racks with their 3500 BioLock, captive hinge pin program and self-gripping gasket strip. - July 28, 2016 - EMKA (UK) Ltd.
The new DD52R-E from Elesa offers IP65 or IP67 sealing for arduous environments on industrial equipment of all kinds where high accuracy measurement of shaft position is required. - July 23, 2016 - ELESA (UK) Ltd
Enoch Precision Machining announces that it has received International Traffic in Arms Regulations (ITAR) certification. ITAR is a set of United States government regulations that control the export and import of defense-related articles and services on the United States munitions list. This certification... - July 20, 2016 - Enoch Precision Machining
The new 4-124 120° concealed hinge from FDB Panel Fittings is designed for surface mounted doors on specialist enclosures and cabinets where it enables easy door removal/re-fitting without loss of the securely retained hinge pin.
Service, maintenance or repair of equipment may be carried out with... - July 16, 2016 - FDB Panel Fittings
The new Elesa VMT-SST three lobe clamping knobs in stainless steel offer strength and ease of operation – even with bulky work gloves. - July 10, 2016 - ELESA (UK) Ltd
Sigma Fasteners, Inc., a manufacturer, and distributor of engineered and high-pressure bolting products, announced today that founding President, Judy Jandl and Vice President, Jerry Jandl are retiring. Cris Baker new President of Sigma Fasteners, with over 25 years of fastener experience steps to the plate with a talented group of industry veterans ready to carry Sigma Fasteners into the future. - July 01, 2016 - Sigma Fasteners, Inc
The new Harter F100 damper from FDB Panel Fittings isolates delicate machines and instruments from external vibration. - June 30, 2016 - FDB Panel Fittings
Swinghandles, rod locks, hinges and gaskets are available from EMKA UK for the traditional 19" electronic rack. - June 25, 2016 - EMKA (UK) Ltd.
The new range of magnetic plugs from Elesa collect ferrous/magnetic particles inside machinery such as gearboxes, engines and pumps. - June 10, 2016 - ELESA (UK) Ltd
Sigma Fasteners, Inc., a manufacturer, and distributor of engineered and high-pressure bolting products, announced today that it received an American Petroleum Institute (API) 20E Monogram License to manufacture API 20E bolting at its original facility in Houston, Texas. Sigma also earned API Spec Q1, 9th edition Certification for the Manufacture and Distribution of Fasteners, Coating, and Plating of Customer Parts for the Oil and Gas Industries. - May 20, 2016 - Sigma Fasteners, Inc
Elesa’s new LV series of high stability mounting feet feature an asymmetric foot design incorporating screw-down pads for positive positioning and enhanced structural integrity for applications such as conveyors and other vibration prone equipment. - May 19, 2016 - ELESA (UK) Ltd
The new Giussani reprogrammable quarter-turn lock from FDB Panel Fittings provides users the flexibility to update keys or switch users so that staff changes or lost keys may be easily accommodated. - May 15, 2016 - FDB Panel Fittings
Wall mounted enclosure hardware from EMKA includes quarter-turn locks, hinges and rubber gasket strip. - May 14, 2016 - EMKA (UK) Ltd.
The new Accessories for Hydraulic Systems catalogue from Elesa covers such items as filler plugs, dipsticks, breathers, level indicators, column level indicators and float level indicators, including with electronic alarms. - May 06, 2016 - ELESA (UK) Ltd
The new DIRAK LED module from FDB Panel Fittings provides users with a flashing red alert on quarter-turn locks to indicate an “open” status, so addressing problems of doors being left fully or partially open. Of course this is especially obvious in low light conditions acting as a reminder... - May 01, 2016 - FDB Panel Fittings
Elesa’s new 90° stability handles provide quick-fit support on powered hand tools or related motor driven workbench equipment, where they offer hand protection at one end or at both ends as required. - April 22, 2016 - ELESA (UK) Ltd
EMKA’s 1000 program quarter-turn locks have been given an alternative 30mm housing in polyamide which offers lower cost and better outdoor longevity for these popular locks. - April 17, 2016 - EMKA (UK) Ltd.
The new compression rod latch from FDB Panel Fittings facilitates a multi-point 3 or 5 point system with 4mm clamping at each latching point. It will be suited to large electrical and electronic cabinets in outdoor or internal wash-down areas. - April 15, 2016 - FDB Panel Fittings
These new 1042/3 2 stage hinges from FDB Panel Fittings provide a full 180° door opening for removable flush doors on large or small cabinets, with two sizes to suit industrial enclosures and electrical housings. - April 13, 2016 - FDB Panel Fittings
The new 1056 friction hinge from EMKA UK is a 180° adjustable hinge unit which provides support for lift up covers and doors in place of a separate cover or door stay. - April 10, 2016 - EMKA (UK) Ltd.
Elesa’s new Castors and Wheels catalogue offers their full range of castor assemblies and components for the industrial, office, medical, display, laboratory, engineering and associated industries. - April 08, 2016 - ELESA (UK) Ltd
EMKA’s new 1000 series ¼ turn lock for transport vehicles accepts plug-in cylinder barrels which need no securing screw for permanent fixture. There is nothing to work loose and the cylinder is resistant to abusive use. - April 03, 2016 - EMKA (UK) Ltd.
EMKA’s 180° screw-on hinges now come with 2D and 3D adjustment types to allow for door re-alignment of specialist cabinets and enclosures or similar access panels. Typical applications include large industrial control cabinets, HVAC systems and screens. - April 01, 2016 - EMKA (UK) Ltd.
The new CMUF adjustable friction hinge from Elesa offers a simple way of supporting flaps, panels, hatches and doors in a desired position against the effect of gravity or limited external forces. - April 01, 2016 - ELESA (UK) Ltd
Elesa UK are offering a new fast turn-around machining service for their standard machine elements such as handwheels, crank handles, clamping knobs, lobe knobs and tri-lobe knobs. - March 30, 2016 - ELESA (UK) Ltd
The spring steel adds new functionality to the shim washers as well, helping them preserve the components themselves. - March 22, 2016 - Stephens Gaskets
The new “Handles for Special Applications” catalogue from Elesa includes many designs of bridge handles, tubular handles, luggage handles, flush handles, inset handles, locking handles and interlock handles with either inbuilt safety or indicator micro-switch, suitable for personnel and machine protection. - March 06, 2016 - ELESA (UK) Ltd
FDB Panel Fittings have introduced the EMKA 1110 polyamide hinges to their range. These hinges permit rapid door mounting and demount by use of a removable hinge pin which also locks the hinge into place and are considered suitable for batch or continuous production of specialist enclosures. - March 04, 2016 - FDB Panel Fittings
New flush mounting CSMH compression latch from Elesa with pop-out T bar handle and IP65 protection from dust and water ingress. The CSMH is suitable for applications on power generation or HVAC equipment, as well as machine controls and power distribution panels. - February 28, 2016 - ELESA (UK) Ltd
GN 1130 lifting lock pins from Elesa are suitable for the secure lifting of goods and equipment on a permanent or temporary basis with fast removal when required. - February 19, 2016 - ELESA (UK) Ltd
The new 1031 hinge from EMKA is quick to install with its integral stud fixing to the cabinet frame. The hinge is expected to be of value to users of cabinets, enclosures and housings for industrial controls or displays where door removal is required in the course of maintenance or re-configuration. - February 05, 2016 - EMKA (UK) Ltd.
EMKA’s new Program 1000 IP69 lock is a snap together design with exceptional sealing and full electrical insulation. It is suitable for frequent wash down area applications such as those found in food processing situations. - January 23, 2016 - EMKA (UK) Ltd.
FDB are now stocking hundreds of new products, as well as additional stock of popular items serving the specialist panel builder and vehicle transport industries with locks, handles, hinges, cabinet sealing and other enclosure hardware in zinc die, reinforced plastics and stainless steel. - January 16, 2016 - FDB Panel Fittings
Elesa’s new MO series horizontal toggle clamps feature the MOAS and MOBS stainless steel designs with in-built safety latch which prevents accidental opening when subjected to strong vibrations or side forces.
Their low profile is ideal for confined areas and for mounting on expansive flat work... - January 10, 2016 - ELESA (UK) Ltd
EMKA have available a new guide to Electronic Locking and Monitoring Systems which gives an introduction to the rapidly developing field of IT data protection. The guide covers electro-mechanical locking, RFID card, PIN Code and fingerprint Bio-locking technologies. - January 09, 2016 - EMKA (UK) Ltd.
FDB Panel Fittings will display their range of cabinet and enclosure hardware accessories for the specialist panel builder at the Southern Manufacturing Exhibition in February 2016. On display will be ¼ turn locks, stainless steel hinges, compression locks, as well as wing and T handles. - December 24, 2015 - FDB Panel Fittings
EMKA now have available a guide to processing information for the use, application and storage of closed cell self-adhesive sponge rubber gasket sealing sections which are used in the cabinet, enclosure and motor vehicle industries. - December 20, 2015 - EMKA (UK) Ltd.
Elesa’s new UC range of self-aligning flange bearings offer easy installation for rotating shafts on equipment such as conveyor systems, where their tolerant fit and protected bearings enable quick, simple assembly or replacement.
Natural shaft alignment up to ±2.5 degrees off centre, together... - December 19, 2015 - ELESA (UK) Ltd
The new Giussani pop-out T handles from FDB Panel Fittings incorporate radial pin tumbler locks and offer the benefits of security with a traditional T style format, now updated to meet modern security and safety concerns. - December 13, 2015 - FDB Panel Fittings