Pentek Introduces 2-Channel RF/IF Rackmount Recorder for Ultra Wideband Signals

Sample rates up to 3.2 GHz with real-time sustained recording rates up to 3.2 GB/sec; Capable of recording RF/IF frequencies up to 2.8 GHz; SystemFlow GUI with signal viewer analysis tool; Up to 20 terabytes of hot-swappable SSD storage to NTFS RAID.

Upper Saddle River, NJ, August 22, 2012 --( Pentek, Inc., today introduced an ultra wide-band RF/IF rackmount recorder, the Talon™ RTS 2709. Using 12-bit, 3.6 GHz A/D converters and state-of-the-art solid state drive storage technology, this system can achieve sustained recording rates up to 3.2 Gbytes per second. It can be configured as a one- or two-channel system and can record sampled data, packed as 8-bit or 16-bit wide consecutive samples.

As a complete recording system, the Talon RTS 2709 recorder is ideal for capturing high bandwidth RF/IF signals with frequencies up to 2.8 GHz. The built-in Windows® 7 Professional workstation with an Intel® Core™ i7 processor provides a platform which allows the user to install post-processing and analysis applications directly on the recorder itself. Signal viewing and analysis tools are provided as part of the SystemFlow recording software for monitoring signals prior to, during and after a recording session.

“These recorders are ideal for capturing wideband signals for communications or radar applications. Now we can satisfy the growing number of customers who need to digitize and record these signals with bandwidths as high as 1.5 GHz,” noted Rodger Hosking, vice president, Pentek. He added, “Previously, if a very wideband signal needed to be captured, you had to break up the signal into smaller bands, each covering an adjacent slice of the spectrum. Now, with the Talon 2709, engineers can capture the whole spectrum in a single channel for the entire bandwidth.”

The RTS 2709’s state-of-the-art A/D converters digitize high-frequency signals at sample rates up to 3.6 GHz. It streams this digitized data to files created on the recorder’s built-in RAID array. These files include time stamping as well as recording parameters and optional GPS (global positioning system) information. Files are stored in the native Windows NTFS (new technology file system) format, allowing them to be immediately used by PCs and applications without the need for post-recording file conversion.

The Talon RTS 2709 recorder moves data at a very high rate to the latest generation SSDs (solid state drives) through SATA-III ports. The Talon RTS 2709 offers configuration options to support up to 20 Terabytes of storage. The drives are hot-swappable and can be configured in multiple NTFS RAID levels, including 0, 1, 5, 6, 10 and 50 to provide a choice for the required level of redundancy.

The RTS 2709 is configured in a 4U 19” rack-mountable chassis, with hot-swappable data drives, front-panel USB ports and I/O connectors on the rear panel. Systems are scalable to accommodate multiple chassis to increase channel counts and aggregate data rates. All recorder chassis are connected via gigabit Ethernet and can be controlled from a single GUI (graphics user interface) either locally or from a remote PC.

Supporting Features and Products
Pentek’s SystemFlow® recording software features a Windows-based GUI (Graphical User Interface) that provides a simple and intuitive means to configure and control the system. In addition, the SystemFlow software includes signal viewing and analysis tools that allow the user to monitor the signal prior, to and during recording, as well as examine the signal during playback. The tools include a virtual oscilloscope and virtual spectrum analyzer, eliminating the need for additional equipment during a data collection session. Customers attest to the easy-to-use interface when setting up their recording systems.

Options, Pricing and Availability
For the latest pricing and availability information, please contact Mario Schiavone by phone at (201) 818-5900 ext.229, or by email at

About Pentek
Pentek develops, manufactures and markets innovative DSP systems and recorders to original equipment manufacturers, distributors and value-added resellers. Pentek offers powerful VME, VPX, VXS, PMC, XMC, cPCI, PCI, PCIe and AMC boards for data acquisition, software radio and digital signal processing featuring Texas Instruments C6000 DSPs, Freescale G4 PowerPCs and Xilinx FPGAs. Pentek's I/O includes A/Ds, D/As, FPGAs, digital up/downconverters and more. Pentek equips all products with high-performance I/O including gigabit serial interfaces and offers strong DSP software support.

Pentek, Talon and SystemFlow are trademarks or registered trademarks of Pentek, Inc. Brand or product names are registered trademarks or trademarks of their respective holders.

For access to the release and data sheets, please visit:

North American Sales Contact: Mario Schiavone, Pentek, Inc., One Park Way, Upper Saddle River, NJ 07458-2311; Telephone 201-818-5900, ext. 770; Fax 201-818-5904; Email; Website

International Sales Contacts: Galleon Embedded Computing in Germany at (49) 89 5908 2101, LVD Systems in Italy at (39) 011 966 1319, RECAB AB in Sweden at (46) 8 6830300, Advanced Embedded Systems in the UK, Spain and Portugal at (44) 0 1202 885 675, Sela Electronic Systems in Israel at (972) 3 6479969,MISH International in Japan at (81) 42-538-7650, Beijing Betaone Sysjob Ltd. in China at (86) 10 82784106 and Acetronix Co. Ltd. in Korea at (82) 24202343, ext. 106, Dynamic C4 Pte. Ltd. In Singapore, Malaysia and Indonesia at (65) 6405 4506. For a list of Pentek representatives and distributors, please visit

Media Contact:
Barbara Stewart
Patterson & Associates
Pentek, Inc.
Mario Schiavone
To schedule an interview with Rodger Hosking, please contact Patterson & Associates.