|
 |
 |
AFT™ Proximal Humerus Fracture Plate, from Shoulder Options, Inc.
The AFT™ Proximal Humerus Fracture Plate is an innovative fracture plating technology that builds upon the fundamentals of the CRP™ by being anatomically shaped and by providing the surgeon...
|
| |
 |
 |
AFT™ Proximal Humerus Fracture Prosthesis, from Shoulder Options, Inc.
The AFT™ Proximal Humerus Fracture Prosthesis is a novel, stemmed standard shoulder arthroplasty design for proximal humerus fracture treatment. It can be used as either a cemented or cementless...
|
| |
 |
 |
aSpire™ Total Shoulder Arthroplasty System, from Shoulder Options, Inc.
A novel, stemmed standard shoulder arthroplasty design. The system includes both pegged and keeled glenoid designs, as well as short- and long-stemmed humeral prosthesis options.
|
| |
 |
 |
Combination Valves, from Hydraulic Actuators & Controls
Combination Valves: Standard combinations of Pilot Operated Check Valves and Relief Valves. Combination Valves invariably have neater installations than the collection of single valves that they replace.
|
| |
 |
 |
CRP™ Cuff Repair Plate, from Shoulder Options, Inc.
The CRP™ is the first fixable suture anchor plate on the market. It is intended for augmentation of transosseous rotator cuff repair, especially in massive tears and re-ruptures in proximity to osteopenic...
|
| |
 |
 |
GTFx Greater Tuberosity Fracture Plate, from Shoulder Options, Inc.
The patent pending GTFx plate is a minimally invasive method of treatment for fractures of the greater tuberosity and for the treatment of cuff avulsions. The GTFx combines an asymmetrical low profile...
|
| |
 |
 |
Luna Anchored™ Stemless Humeral Prosthesis, from Shoulder Options, Inc.
The Luna Anchored™ Stemless Humeral Prosthesis takes off where the Luna leaves off by the addition of anchor bolts through the base plate of the device. This allows for enhanced short term stability.
|
| |
 |
 |
Luna™ Stemless Humeral Prosthesis, from Shoulder Options, Inc.
The Luna™ Stemless Humeral Prosthesis is an anatomic, press-fit humeral head replacement that is designed to overcome the limitations of traditional stemmed devices. With the stemless design, optimal...
|
| |
 |
 |
Manifold & Banjo Valves, from Hydraulic Actuators & Controls
Manifold & Banjo Valves: Manifold and Banjo mounted valves fit directly to the cylinder or motor giving added security, safety and neatness of installation. Most of HAC's P O Check and Overcentre Valves...
|
| |
 |
 |
Overcentre Valves, from Hydraulic Actuators & Controls
Overcentre Valves: Used to lock cylinders positively into position and to prevent load runaway during cylinder or motor movement.
Variations:
Single or Dual Valves. Selection dependant on the geometry...
|
| |
 |
 |
PO Check Valve, from Hydraulic Actuators & Controls
Pilot Operated Check Valves: Spool Control Valves inherently leak allowing cylinders to drift. The inclusion of a P O Check Valve in the circuit will positively lock a cylinder in position.
Variations:...
|
| |
 |
 |
Relief Valves, from Hydraulic Actuators & Controls
Relief Valves: Control system pressures - can be used to vent direct to tank or for crossline applications.
Variations:
Direct Acting. Simplest Relief Valve - good dirt tolerance.
Differential...
|
| |