Miniature Piston Pump Ideal for Low Volume OEM Liquid Pumping Applications

Clark Solutions’ Model ET-17 Miniature Solenoid Operated Piston Pumps provide a proven technology for liquid pumping applications up to 26.5 GPH at pressures up to 29 PSI. Pump applications range from misting and circulation systems, transferring inks and oil lubricants, disinfectant spraying and dispensing of condensate or water. - September 25, 2015

New Peristaltic Pump Features Integrated Stepper Motor for Accurate Dispensing of Liquids

Unoverse Boxer 9000 Peristaltic Pumps provide liquid flow from 0.2 to 270 ml/min and feature either an integrated 6-24 VDC or 24 VDC stepper motor for smooth, low-pulse flow and accurate dispensing. - September 25, 2015

High Pressure Rotary Gear Pumps Feature No-Gasket Design

700 Series Rotary Gear Pumps feature a gasket-free design, anti-friction bearings, and precision ground joints to deliver consistent performance and long service life. An innovative lip seal provides an ample safeguard against liquid leakage and the entrance of air. - September 24, 2015

New Solenoid Valves Ideal for Aggressive Media

Molded 3-way solenoid driven isolation valves designed for demanding low flow applications. - September 24, 2015

New Stainless Steel Rotary Vane Pumps Ideal for Vending Machines, Dispensers, Cooling and Filtration Systems

Clark Solutions announces its PA Series Stainless Steel Rotary Vane Pumps. All PA Series pumps have passed the NSF International certification process and are compatible for use in food, drinking water, and other applications. PA Stainless Steel Rotary Vane Pumps are available in 8 displacements... - March 12, 2015

New Stainless Steel Turbine Flow Meter/Flow Sensor Features Patented Measurement Technology to Deliver Outstanding Flow Sensing Capabilities

SS Turbine Flow Meter / Flow Sensor utilizes IR Reflected Digital Output Technology which accurately follows the fluctuation of flow in low flow and high pressure flow monitoring and totalizing applications. - March 11, 2015

Specialty 2-Way and 3-Way Inert Isolation Valves Feature Unique Leak-Free "Soft Seal" Design

Clark Solutions MTV Solenoid Valve Series incorporate a unique FPM or Perfluor® soft seal design which resists damage to valve seals from aggressive media and particulates in the media stream. - December 19, 2014

New 3/4” Single-Jet Totalizing Water Meters Meet ANSI/NSF Standards for Material Safety and Lead-Free Compliance

Certified to meet ANSI/NSF 61 for materials safety and ANSI/NSF 372 for lead free compliance by the Water Quality Association, Clark Solutions’ new CLXC-P Water Meters are designed for a broad range of sub-metering applications. - October 25, 2014

New Hand-Held Data Logger Marries Easy Operation with Industry Leading Measurement Capabilities

New ALMEMO 2590-A Series Professional Measuring Instrument with Data Logger Function provides an easy to understand menu system, 2 or 4 measuring inputs for 100,000 measured values, internal memory or external memory options, and support for the patented ALMEMO sensor connection system that allows any sensor to be easily connected to any ALMEMO Measuring Instrument. - October 25, 2014

New Magnetic Drive Gear Pump Ideal for Laboratory Instrument, Medical Device, Cooling System, and Other Applications

Model Series 15000 Rotary Vane Pumps mount in any position, operate oil-free, and are easy to service. - September 26, 2014

Clark Solutions Introduces New Multi-Jet Totalizing Water Meter

MJ-SDC Water Meters are an ideal choice for a range of municipal, private and industrial water metering applications. - September 26, 2014

New Ultrasonic Flow Meter Provides Excellent Long Term Stability, Broad Fluid Compatibility, and +/- 0.75% Full Scale Accuracy

Clark Solutions Model CSLFC Ultrasonic Flow Meters are ideal for monitoring most clean liquids and many liquids with entrained solids. - September 25, 2014

CU15 Miniature Air Operated Diaphragm Pump Features Maximum Flow Rate of 17LPM (4.49GPM) for Pressures to 70M (99.7PSI)

Designed for applications having high humidity or potentially explosive atmospheres. - May 15, 2014

EMX-08 Miniature Solenoid Operated Piston Pumps Ideal for Low Volume Pumping Applications

Featuring precision machined components designed to guarantee minimum wear and exceptional component life. - May 15, 2014

Clark Solutions' New Ball Valves Require Less Power, Provide Smaller Footprint

Clark Solutions 8P Series of Direct Mount Pneumatic Actuated Ball Valves feature a unique stem seal design and technologically advanced “O” ring back TFE seats which dramatically reduce operating torque. These exclusive design features enable engineers to use smaller actuators, reducing footprint and power requirements in many applications. - March 31, 2014

Clark Solutions' New Electric Actuated Ball Valves Feature Small Package Size, NEMA 4X Enclosures, and Low Power Consumption

New Series 8E Ball Valves are available in 9 models with a wide range of available options. - March 29, 2014

Clark Solutions' Drill Driven Impeller Pump for Corrosive and Non-Corrosive Fluid Transfer Applications

Series N2001 and U2001 Pumps rated to flows of 60LPM (15.9GPM), pressures to 4 BAR (58 PSI), designed for oils, acids, bases, and water based solutions. - March 29, 2014

Differential Pressure Switch Ideal for Room Pressure Monitoring, Interlock Pressure Systems, and Controlling Pressures in Gas Fired Heating Systems

Clark Series 605 Differential Pressure Switches feature a unique diaphragm design and self-cleaning contacts for more accurate switching points. - December 10, 2013

New Magnetic Drive Gear Pumps Feature Brushless DC Motor with Integrated Driver Circuit, Chemically Resistant Design, and Flow Rates to 205 LPH

Clark Solutions introduces its FG Series Magnetic Drive Gear Pumps. These high-performance gear pumps incorporate a 24V brushless DC drive motor in a rotor-less configuration and high precision magnetic drive to provide precise transfer of aggressive fluids. FG gear pumps feature AISI 316L or PPS... - October 02, 2013

New 2-Way & 3-Way Inert Isolation Valve Ideal for Automated Chemistry Applications

RVA Series Manifold Mount Valves feature small footprint, reduced energy consumption, and low heat generation. Can be used in continuous duty applications. - October 02, 2013

New Diaphragm Gas Pump Features Unique Mounting Bracket and Very Low Power Consumption

Boxer Series S Diaphragm Pump “push/pull” mounting bracket allows tool-free pump removal/replacement. - September 30, 2013

New Economical BTU Meter/Energy Meter for Use in Energy Transfer and Heating/Cooling Systems

New CS-EM BTU Meter/Energy Meter is available in 3/4” to 10” pipe size, and is an excellent choice for measuring energy flow in heating/cooling loops, solar heating systems and process applications. - September 13, 2013

New Exchangeable Turbine Flow Sensor Ideal for Low Flow Pharmaceutical and Industrial Applications

Clark Solutions’ PFAD Disposable Turbine Flow Sensor is designed for applications with flow rates of .06 lpm to 20 lpm, accuracy 1% of reading. PFAD Flow Sensors feature an easy-to-replace, ultra-lightweight turbine assembly. - August 06, 2013

New Flow Meter Excellent Choice for Flow Monitoring, Process Control, and Energy Management Systems

Available for 1/4" to 1.0" pipe sizes, DN Series Liquid Vortex Flow Meters have no moving parts, are easy to install, offer better accuracy at lower cost, and provide excellent media resistance. - August 02, 2013

New Magnetic Drive Gear Pump Ideal for High Technology, Medical, and Cooling Systems Applications

MG200 Gear Pumps from Clark Solutions feature pulsation-free operation. - June 27, 2013

New 2-Way Inert Isolation Valves Ideal for Aggressive Media

Model WTA-2 Solenoid Operated Inert Isolation Valves feature unique elastomeric seals which resist damage from particulate matter that would destroy typical inert valves. - May 16, 2013

Miniature Air Pump Ideal for Medical, Environmental, and Industrial Applications

Model 8018GT Miniature Diaphragm Air Pumps are an excellent choice where chemical resistance and quiet, reliable performance is required. - May 15, 2013

Economical Gear Pumps Ideal for Water or Oil Transfer

Series UP2 Compact Gear Pumps from Clark Solutions transfer water to 2.6 GPM, oil to 52.9 GPH. - May 14, 2013

New Exchangeable Turbine Flow Sensor Ideal for Low Flow Pharmaceutical and Industrial Applications

Clark Solutions’ PFAD Disposable Turbine Flow Sensor is designed for applications with flow rates of .06 lpm to 20 lpm, accuracy 1% of reading. PFAD Flow Sensors feature an easy-to-replace, ultra-lightweight turbine assembly. - April 08, 2013

New Portable Datalogger Features Connections for Virtually Any Sensor

Clark Solutions’ MA2590 Portable Indicator/Datalogger offers multiple measuring inputs and connects to virtually any sensor with a linear signal output. - April 08, 2013

New Peristaltic Pumps Feature Enhanced Dispensing Accuracy

Clark introduces the Boxer 6000 Series DC-Powered Peristaltic Pump, designed to provide high accuracy and low pulsation. - March 15, 2013

Miniature Piston Pumps Ideal for Low Volume Pumping Applications

Clark Solutions’ Model EMX08 / E08 Oscillating Piston Pumps a great solution for low volume applications where pump size is critically important. - March 14, 2013

Pneumatic Isolation Valves Excellent Choice for Transfer of High Purity or Chemically Aggressive Media in Explosive or Inflammable Environments

Clark Solutions Model Series P Pneumatic Two-way and Three-way Isolation Valves available with a wide range of orifice sizes with wetted components in PTFE, PEEK, and PPS. - February 13, 2013

New BTU/Energy Meter Delivers Low Cost Monitoring of Heating/Cooling Process Systems

Built-in Modbus communications allow easy interface with building/process automation systems. - November 29, 2012

New Miniature Diaphragm Pumps Ideal for High Viscosity Liquids with Suspended Solids

Clark Solutions’ Model MID Air Operated Diaphragm Pumps, rated for liquid flow rates up to 5 LPM (1.32 GPM), pressures to 70 M (99.7 PSI). - November 28, 2012

Clark Solutions’ New Air Operated Diaphragm Pumps Designed for Demanding Applications

Clark Solutions’ Debem Pumps ideal for use in demanding applications and high-humidity environments. - November 28, 2012

New Drill Driven Impeller Pumps Great Choices for Corrosive and Non-Corrosive Transfer Applications

Series N2001 and U2001 Pumps rated to flows of 60LPM (15.9GPM), pressures to 4 BAR (58 PSI). - August 08, 2012

New Peristaltic Pump with Stepper Motor for Automatic Chemical Dosing in Laboratory Applications

Clark Solutions’ Boxer Unoverse 9000 Peristaltic Pump provides liquid flow from 0.2 to 270 ml/min and features an integrated stepper motor for smooth, low-pulse flow and accurate dispensing. - June 25, 2012

Economical Inert Isolation Valve Alternative for Automated Chemistry Equipment, Clinical, Biotech Analyzers

Model PKV-R/K PPS & PEEK Molded Inert Isolation Valves Feature Molded Design, Particle-Tolerant Soft Valve Seat Design. - June 22, 2012

Pocket Size Diaphragm Pump Safe for Hazardous Areas

Pageboy Series SFD15 Pneumatically Powered Diaphragm Pumps are Rated to a Maximum 3 LPM and are Ideal for Solvents, Light Oils, and Other Low Viscosity Fluids - June 21, 2012

New Low Cost Turbine Flow Sensor Series Now Available

Clark CFS Flow Sensors available in three models for 1/4”, 3/8”, 1/2" pipe size and flow ranges to 8 LPM, 14.1 LPM, and 20 LPM. - April 13, 2012

New Easy-to-Install Turbine Flow Sensor Ideal for Irrigation Projects and Similar Applications

Designed for 3 & 4 inch pipe systems, FSI-S00 Flow Sensors accurately detect flow at far lower rates than competitive devices. - April 11, 2012

New Impeller Type Turbine Flow Sensor Features Proprietary Mounting Tee, Ultra-Lightweight Impeller, and Smart Electronics Detection System

Designed for 1, 1-½, & 2 inch pipe systems, FSI-T00 Flow Sensors accurately detect low flow rates far better than competitive devices. - April 11, 2012

New Vortex Flow Transmitters Ideal for Use in Heat Exchange Systems

Clark Solutions introduces theDN420 Series of Vortex Flow Transmitters, an economical choice for liquid media flow and temperature monitoring and control in applications such as heat exchange systems, cooling loops, and industrial processing. - August 10, 2011

New BTU/Energy Meter Delivers Low Cost Monitoring of Heating or Cooling Systems

Clark Solutions introduces its Model DN-EM Energy Flow Monitor, an economical energy flow monitor intended for applications in energy transfer and in heating/cooling systems. - August 10, 2011

New Miniature Diaphragm Pump for Gases and Liquids Packs a Lot of Features in a Small Package

Boxer Series 10K Diaphragm Pumps are ideal for high temperature and process applications, deliver flow rates to 0.8 LPM (liquids), or 4 LPM (gases), and are available in single or dual head pump models. - May 20, 2011

New Clark Vortex Flow Transmitters Economical Choice for ¼” to ¾” Systems

New DN-420 Series Vortex Flow Transmitters - Loop Powered, 2-Wire, 4-20 mA & Frequency Output, ¼” to ¾” Pipe Sizes, Flow Ranges 0.3 to 22 GPM - May 20, 2011

New Clark Energy Monitoring Systems Ideal for Solar, Submetering, Energy Transfer Systems

New Model DN-EM BTU/Energy Monitor tracks energy transfer in heating or cooling systems, ½” & ¾” pipe, temperatures to 185°F (85°C). - May 20, 2011

Clark Solutions’ New Compact Rotary Vane Pumps Ideal for Tight Locations

New Series CA & MA Compact Rotary Vane Pumps Measure Only 95 x 75.5 mm, Deliver Flow to 290 LPH (77 GPH). - March 18, 2011

Clark's New Miniature Stepper Motor Driven Diaphragm Pumps Designed for High Performance OEM Applications

New diaphragm pumps available in single or dual head models ideal for use in environmental sampling instruments, portable and fixed gas analysers, and dispensing and many other pressure and vacuum applications. - March 18, 2011

Press Releases 1 - 50 of 68