Recent Headlines
Control Model 4242 DB25 A/B Switch via Push-Button or LAN Access and GUI
The Model 4242 DB25 A/B Network Switch offers security features. Proper authentication is required for remote access via the 10/100 Base-T connection. User privileges include: rights to monitor status, control switch functions, setup users, and configure the LAN Access port. - February 25, 2012 - Electro Standards Laboratories
Insert or Remove Inline Network Devices with the Model 6296 Fiber Optic Bypass Switch
The Model 6296 single mode LC duplex fiber optic bypass switch enables the user to insert or remove devices that are linked together in a series within a network link. - February 23, 2012 - Electro Standards Laboratories
Electro Standards Introduces Model 7296 MDR/MXR Dual Channel A/B Switch with USB Serial Remote
The Model 7296 is a 2-channel MDR/MXR A/B Switch with USB RS232 Serial Remote Control. - February 16, 2012 - Electro Standards Laboratories
Electro Standards Laboratories Releases Model 8449 A/B Switch with Barrier Terminal Block Remote
The Model 8449 is a multi-interface A/B switch with Barrier Terminal Block Port for Remote Monitoring and 2 channels of RJ45 connectors and 3 channels of BNC connectors. - February 11, 2012 - Electro Standards Laboratories
Ekinops Introduces 20G Transponder, Doubling 10G Capacity of Existing Transport Networks While Lowering Cost
Ekinops is doubling the capacity of 10G optical networks. Its new dual capacity transponder carries two 10Gs in the space of one, at a lower cost per 10G. - January 26, 2012 - Ekinops
Electro Standards Laboratories Announces DIN Rail Mounted, Cat5e Switch with Position Feedback
The Model 9084 is a Cat5e RJ45 DIN Rail Mount Switch with keylock to control switching between A and B positions and monitor port to provide position feedback. - January 15, 2012 - Electro Standards Laboratories
Electro Standards Laboratories Announces Model 4428 DB9 A/B Switch with RS232 Serial Remote Control
The Model 4428 is a 2-position DB9 switch that allows the sharing of one DB9 Device among two others via front panel pushbutton or RS232 Serial Remote Control. - January 06, 2012 - Electro Standards Laboratories
Advanced Methods of Powering Sensor Systems Developed by Electro Standards Labs
Electro Standards Laboratories has developed expertise in the science of high-density energy storage with high pulsed power capability for remote sensor systems. This technology has commercial applications and the company is seeking parties interested in this technology for their specific applications. - January 05, 2012 - Electro Standards Laboratories
Electro Standards Announces Remotely Controllable Fiber Optic A/B Switcher to Provide Backup for LC Duplex Networks
The Model 6301 is an LC Duplex A/B Switch with Telnet and GUI Remote Control that allows quick connection to any one of two LC Duplex fiber optic networks from one computer. - December 21, 2011 - Electro Standards Laboratories
World Media Group Manufactures GRAMMY Nominated Packaging
World Media Group, Inc., a global leader in the production of optical discs and promotional products, announces its role in the manufacturing of Reckless Kelly's album 'Good Luck & True Love.' The album has received a nomination in the Best Recording Package Category for the 53rd Annual GRAMMY... - December 21, 2011 - World Media Group
Electro Standards Adds Model 7300 A/B Switch with Automatic Fallback to Their Line of Network Switches
The Model 7300 is an RS232/RS530 A/B Switch that allows the sharing of a single device among two other devices with automatic fallback operation and remote control port. - December 17, 2011 - Electro Standards Laboratories
Electro Standards Intros 4-State CAT5e Switch That is Ideal for Secure Conference Room Apps
The Model 5535 is a Cat5e RJ45 network switch that allows a device connected to the ROOM port access to three other devices and a secure Off-Line position with a turn of the keylock actuator. - December 11, 2011 - Electro Standards Laboratories
Electro Standards Laboratories Releases Model 7295 DB25 Crossover Switch That Allows Both Pushbutton and Contact Closure Remote Control
The Model 7295 is a DB25 Switch with Contact Closure Remote that supports connections between four devices or peripherals in two different positions, Normal and Crossover. - December 07, 2011 - Electro Standards Laboratories
Electro Standards Laboratories Introduces the Model 7271 RJ45 A/B/C/D Switch with Two Methods of Control: Local Push-Button and Remote ASCII Commands
Electro Standards Laboratories designed the Model 7271 to meet the needs of IT Managers who wanted a slim rack-mount 4-position switch that could be easily controlled via push-button or remotely via RS232 ASCII commands. - December 02, 2011 - Electro Standards Laboratories
Electro Standards Laboratories Announces Model 7371 RJ45 Switch with RS232 Serial Remote Control Supports Cat6A Networks
The Model 7371 is a 3-position RJ45 Switch with RS232 Serial Remote Control and Certified for Cat6A Compliance - December 01, 2011 - Electro Standards Laboratories
Electro Standards Laboratories Introduces Model 8581 DB9 Matrix Switch That Provides Quick Access to Shared Backup Data Line or Channel
The Model 8581 is a DB9 Matrix Switch designed by Electro Standards Laboratories to allow switching of two inputs to three outputs in a variety of configurations in order to provide quick access to a shared channel, backup data line or peripheral. - November 17, 2011 - Electro Standards Laboratories
Electro Standards Labs Introduces a New A/B Switch Geared for Video Conference Room Applications
The new Model 7269V DB9 A/B switch is configured to switch video conference, broadcast and presentation systems with simple push-button control or with remote ASCII commands. - November 12, 2011 - Electro Standards Laboratories
Connect to 8 Devices from One Computer with Model 7329 CAT6 Switch
The Model 7329 is a Cat6, 8-position RJ45 Switch that allows quick connection to any one of eight devices from one computer or network via pushbutton or ASCII RS232 Serial Remote Data. - November 09, 2011 - Electro Standards Laboratories
Power Loss is No Problem, Fiber Optic A/B Switch Continues to Pass Data
Model 6299 all optic LC Duplex AB switch is slim and fits into a standard 19" rack. The unit is simply controlled manually via a push-button. If power is lost, the switch defaults to the A position (prime) and continues to pass data. When the power is restored the switch stays in the A position and continues to pass data. - November 05, 2011 - Electro Standards Laboratories
Model 7289 Dual Channel DB37 AB Switch Allows User to Remotely Lockout Front Panel Control
The Model 7289 features remote control via an Ethernet 10-Base-T connection and either Telnet commands or via a Graphical User Interface (GUI). Through either of these control methods, the user can lockout the front panel push-button control. - November 03, 2011 - Electro Standards Laboratories
Extensive GUI Software Enhances Model 7810 8-to-1 HD15 Network Switch
Easy-to-use software is incorporated into the Model 7810 8-to-1 HD-15 network switch with 10/100 Base-T LAN access. Just point and click to monitor switch status, control functions, lock or unlock the front panel controls and configure the LAN Access port. - October 30, 2011 - Electro Standards Laboratories
Compact Modular RJ45 A/B Switches & Rack Create Affordable, Expandable Networks
Up to seven of Model 7007 RJ45 A/B Switch Modules fit into Model 9043 Rack with Power/Control Module to allow system expansions for growing networks. - October 29, 2011 - Electro Standards Laboratories
ABB Named Leading Supplier of Enterprise Asset Management Software Solutions
ARC Advisory Group market study names ABB #1 EAM supplier in Asia and Latin America; #1 worldwide in power generation, transmission and mining sectors. - October 28, 2011 - ABB
NYCE Exhibiting at TelcoTV 2011 Conference & Expo Oct 25-27, 2011 in New Orleans
NYCE Networks, a leading provider of innovative Plastic Optical Fiber to Ethernet products, announced today that NYCE will be exhibiting at the TelcoTV 2011 Conference & Expo, from October 25-27th, 2011 at the Ernest E. Morial Convention Center in New Orleans, Louisiana. The TelcoTV 2011... - October 20, 2011 - NYCE Networks
M4001/4002 Board Only AB Switches Allow You to Design the Case, Pushbutton and LED Display
The Models 4001 and 4002 are board only switches with pushbutton and LED footprints that allow the sharing of 42 pins of a device among two other devices. Ideal for embedded applications. - October 16, 2011 - Electro Standards Laboratories
Ekinops Introduces 100G Transport and Aggregation for Metro, Regional and Long-Haul Networks
Ekinops has announced two new products that enable 100 Gbps transport for service providers, either as a native 100G stream or in aggregated lower-rate signals. - October 14, 2011 - Ekinops
Model 7385 DB9 ABCD Switch Offers Both Low Impedance and Remote Control
The Model 7385 DB-9 A/B/C/D switch is ideal for apps requiring low impedance. The resistance between the Common port pins and the corresponding current position pins is less than 0.8 ohms. The switch is controlled via the DB9 Remote port and RS232 serial data ASCII commands. - October 07, 2011 - Electro Standards Laboratories
Very High Speed, Ruggedized Fiber-to-RS485/422/232 Interface Converter Now Available in 3 Configurations
Electro Standards Laboratories now manufactures a board-only, Model 4159, and a DIN Rail Mounted version, Model 4149-DIN of Model 4149 very high speed, ruggedized ST Fiber-to-RS485/422/232 Interface Converter. - September 28, 2011 - Electro Standards Laboratories
Electro Standards 6-Channel Switch Offers Remote Control Capability
The Model 7363 RJ45 Switch allows the sharing of two devices from one T1 network or device for each of its six channels, featuring RS232 Serial Remote Control. - September 23, 2011 - Electro Standards Laboratories
Model 6302 Dual Channel LC Duplex Switch is an Essential Tool for Centrally Operated Network Management Systems
The Model 6302 is an LC Duplex Switch that allows 2 Channels quick connection to any one of two LC Duplex Fiber Networks from one computer. IP Addressable for Critical Network Alternate-Path Switching. - September 14, 2011 - Electro Standards Laboratories
CellMite Model 4325B-GUI Intelligent Digital Signal Conditioner Features Nonvolatile Memory for Parameter and Calibration Storage
CellMite Model 4325B-GUI digital signal conditioner connects to a standard load cell, extensometer or pressure sensor and simultaneously generates a serial digital output for connection to a PC as well as a +/-10V analog output. - September 11, 2011 - Electro Standards Laboratories
Microprocessor-Based Model 4215-L Smart Meter is Designed for the Measurement and Control of Dual-Channel Measurement Fixtures
Model 4215-L combines two simultaneous sample LVDT channels, print capabilities and RS232/485 serial communication into a versatile instrument. - September 10, 2011 - Electro Standards Laboratories
New Dual-Channel Load Cell Indicator Features Auto Load Cell ID and Auto Setup for 25 Load Cells
Model 4215A-204-1 load cell indicator captures the load peak and valley, and displays in pounds, kilograms, Newtons, PSI, MegaPascals, kilo-pounds, kilo-Newtons, metric tons, or mV/V. - September 09, 2011 - Electro Standards Laboratories
NYCE Exhibiting at OSP Expo Sept 12-14, 2011 in Cincinnati, Ohio
NYCE Networks, a leading provider of innovative Plastic Optical Fiber to Ethernet products, announced today that NYCE will be exhibiting at the OSP Expo, from September 12-14, 2011 at the Duke Energy Center in Cincinnati, Ohio. The OSP Expo is a show where the telecommunications industry showcases... - September 05, 2011 - NYCE Networks
Model 4215 Load Cell Indicator Provides Accuracy, Reliability, and Repeatability
The Model 4215 Smart Indicator combine force channels, encoder position channels, print capabilities, and RS232/485 serial communications into one versatile instrument. - August 31, 2011 - Electro Standards Laboratories
Motorola®/Codex® Compatible Cables Available from Electro Standards
Electro Standards Laboratories now offers Motorola/Codex compatible cable assemblies. These high-quality cables are compatible with most Motorola/Codex data and voice communication system requirements including multiplexers, DSU/CSU, DS1/DS3 and T1/E1 equipment. - August 28, 2011 - Electro Standards Laboratories
Model 9449 Tri-Channel DB9 Switch Ideal for RS422 Applications
The Model 9449 provides simultaneous A/B switching for all three channels with a flip of a switch. Supports RS422 Applications with DB9 interfaces. - August 28, 2011 - Electro Standards Laboratories
CE Certified, RoHS Compliant, A/B Switch Provides Critical Network Switching for Fiber Optic Networks
QuickSwitch® Model 6254 is an LC Duplex A/B Switch that is RoHS Compliant and CE Certified with four independent channels of A/B switching to provide critical backup for fiber optic networks. - August 21, 2011 - Electro Standards Laboratories
NYCE Announces Sales Agreement with Eastern Independent Telecommunications for Canada
NYCE Networks, a leading provider of innovative Plastic Optical Fiber to Ethernet products, announced today that NYCE has entered into an agreement with Eastern Independent Telecommunications (EIT) to sell NYCE products in Canada. - August 09, 2011 - NYCE Networks
NYCE Announces USA Sales Agreement with Utility Sales Associates
NYCE Networks, a leading provider of innovative Plastic Optical Fiber to Ethernet products, announced today that NYCE has entered into an agreement with Utility Sales Associates to sell NYCE products in the United States. Utility Sales Associates is a leading sales and representation company that... - August 08, 2011 - NYCE Networks
NYCE Announces USA Sales Agreement with Rep Com International
NYCE Networks, a leading provider of innovative Plastic Optical Fiber to Ethernet products, announced today that NYCE has entered into an agreement with Rep Com International to sell NYCE products in the United States. Rep Com International is a leading sales and representation company that has... - August 03, 2011 - NYCE Networks
A/B Network Switch Design Guide Available from Electro Standards
Electro Standards Laboratories has just published its white paper entitled “A/B Network Switches – A Basic Design Guide.” The paper evaluates A/B backup switch design elements including: switch form, interfaces, environment, ruggedness, speed, controls, security, channels, and power loss. - August 03, 2011 - Electro Standards Laboratories
NYCE Announces USA Distribution Agreement with TriNet Communications
NYCE Networks, a leading provider of innovative Plastic Optical Fiber to Ethernet products, announced today that NYCE has entered into an agreement with TriNet Communications to distribute NYCE products in the United States. TriNet is a leading distribution and supply chain logisitics company that... - July 19, 2011 - NYCE Networks
NYCE Releases 4 New Product Videos
NYCE Networks, a leading provider of innovative Plastic Optical Fiber to Ethernet products, announced today the release of four new videos on their website featuring NYCE products. The new videos are the NYCE Products Overview Video, NYCE Residential Products Video, NYCE Commercial Products Video,... - July 18, 2011 - NYCE Networks
Hibernia Media Deploys Ekinops Optical Equipment to Transport Critical Uncompressed Video Content
Carrying huge, uncompressed high-def video files is critical to Hibernia Media’s work with broadcasters and content providers, so the company chose Ekinops equipment to transport the signals. - July 09, 2011 - Ekinops
Bezeq Deploys Ekinops 360 for Broadband and Advanced IP Services to Residential, Business Customers
Israel’s largest telecom services provider, Bezeq, is now using Ekinops optical transport equipment to provide high-speed broadband and IP telephony services to business and residential customers. - June 18, 2011 - Ekinops
Ekinops Introduces Family of Ethernet Switching and Routing Solutions, Integrated with Its Optical Transport Offering
Ekinops enhances its optical transport solutions with Ethernet switching and routing options that span the network edge to the network core. - June 16, 2011 - Ekinops
Data Center Provider DBSi Deploys Ekinops DWDM Equipment to Upgrade Mission-Critical Data Network
Data center operator DBSi is using equipment from Ekinops, the optical transport company, to provide high-capacity communications links among its three Pennsylvania data centers. - June 15, 2011 - Ekinops
NYCE Exhibiting at CommunicAsia 2011 from June 21-24, 2011 in Singapore
NYCE Networks, a leading provider of innovative Plastic Optical Fiber to Ethernet products, announced today that NYCE will be exhibiting at CommunicAsia 2011, from June 22-24, 2011 at Marina Bay Sands, Singapore. CommunicAsia 2011 is Asia’s largest international communications and information... - June 13, 2011 - NYCE Networks
Safety Begins with Teamwork: Pentegra Systems LLC Receives the 2010 ASA-Chicago Safety Award
Pentegra Systems LLC has been awarded the Safety Award for 2010 by the ASA Chicago Chapter. This marks the fourth year in the last five that Pentegra has been awarded the ASA’s top safety award. - June 12, 2011 - Pentegra Systems LLC