Recent Headlines
Within Machine Shops; Turned Product; & Screw, Nut, & Bolt Manufacturing
Accessories for Hydraulic Systems Catalogue - New from Elesa
The new Accessories for Hydraulic Systems catalogue from Elesa covers such items as filler plugs, dipsticks, breathers, level indicators, column level indicators and float level indicators, including with electronic alarms. - May 06, 2016 - ELESA (UK) Ltd
New Illuminating Indicator for Quarter-Turn Locks from FDB Panel Fittings
The new DIRAK LED module from FDB Panel Fittings provides users with a flashing red alert on quarter-turn locks to indicate an “open” status, so addressing problems of doors being left fully or partially open. Of course this is especially obvious in low light conditions acting as a... - May 01, 2016 - FDB Panel Fittings
New Stability Handles from Elesa for Quick-Fit Support
Elesa’s new 90° stability handles provide quick-fit support on powered hand tools or related motor driven workbench equipment, where they offer hand protection at one end or at both ends as required. - April 22, 2016 - ELESA (UK) Ltd
New 1000 Program Polyamide Housing for EMKA Quarter-Turn Locks
EMKA’s 1000 program quarter-turn locks have been given an alternative 30mm housing in polyamide which offers lower cost and better outdoor longevity for these popular locks. - April 17, 2016 - EMKA (UK) Ltd.
New Multi-Point Compression Lock System from FDB Panel Fittings
The new compression rod latch from FDB Panel Fittings facilitates a multi-point 3 or 5 point system with 4mm clamping at each latching point. It will be suited to large electrical and electronic cabinets in outdoor or internal wash-down areas. - April 15, 2016 - FDB Panel Fittings
2 Stage Hinges for Flush Doors Now Available from FDB Panel Fittings
These new 1042/3 2 stage hinges from FDB Panel Fittings provide a full 180° door opening for removable flush doors on large or small cabinets, with two sizes to suit industrial enclosures and electrical housings. - April 13, 2016 - FDB Panel Fittings
New EMKA Friction Hinge with Adjustable Torque
The new 1056 friction hinge from EMKA UK is a 180° adjustable hinge unit which provides support for lift up covers and doors in place of a separate cover or door stay. - April 10, 2016 - EMKA (UK) Ltd.
New Industrial Castors and Wheels Catalogue from Elesa UK
Elesa’s new Castors and Wheels catalogue offers their full range of castor assemblies and components for the industrial, office, medical, display, laboratory, engineering and associated industries. - April 08, 2016 - ELESA (UK) Ltd
Laboratory Testing Inc.’s President Honored with SmartCEO’s Family Business Award
Laboratory Testing Inc. president and CEO, Mike McVaugh will be honored by the Philadelphia SmartCEO with the 2016 Family Business Award. The Awards program celebrate the distinguished achievements of 30 of Philadelphia’s top family businesses. - April 06, 2016 - Laboratory Testing Inc.
EMKA – New ¼ Turn Lock for Transport Vehicles Takes Plug-in Cylinders
EMKA’s new 1000 series ¼ turn lock for transport vehicles accepts plug-in cylinder barrels which need no securing screw for permanent fixture. There is nothing to work loose and the cylinder is resistant to abusive use. - April 03, 2016 - EMKA (UK) Ltd.
Laboratory Testing Inc. Scheduled to Exhibit at Design-2-Part Show
The sales team from Laboratory Testing Inc. will display materials testing, nondestructive testing, and calibration services in Booth # 240 during the 2016 Design-2-Part Show. The event will take place at the Meadowlands Exposition Center in Secaucus, NJ on April 13-14, 2016. LTI is experienced with all types of metals and alloys and performs testing to industry standards. - April 02, 2016 - Laboratory Testing Inc.
EMKA 180° Hinges Now Adjust in 2 or 3 Dimensions
EMKA’s 180° screw-on hinges now come with 2D and 3D adjustment types to allow for door re-alignment of specialist cabinets and enclosures or similar access panels. Typical applications include large industrial control cabinets, HVAC systems and screens. - April 01, 2016 - EMKA (UK) Ltd.
New Adjustable Friction Hinge from Elesa UK
The new CMUF adjustable friction hinge from Elesa offers a simple way of supporting flaps, panels, hatches and doors in a desired position against the effect of gravity or limited external forces. - April 01, 2016 - ELESA (UK) Ltd
New Elesa Standard Machining Service Saves Time, Eliminates Waste, Cuts Costs
Elesa UK are offering a new fast turn-around machining service for their standard machine elements such as handwheels, crank handles, clamping knobs, lobe knobs and tri-lobe knobs. - March 30, 2016 - ELESA (UK) Ltd
Laboratory Testing Inc. Hires Veteran Metallurgist as Mechanical Testing Manager
Laboratory Testing Inc. welcomes veteran metallurgist, Bill Stockdale, as Mechanical Testing Manager. Bill joins LTI with over 35 years of experience in testing, quality assurance, product and process development, and technical support for markets including aerospace, nuclear, medical implant and durable goods. - March 25, 2016 - Laboratory Testing Inc.
Stephens Gaskets Introduce New Range of High Carbon Spring Steel Shim Washers
The spring steel adds new functionality to the shim washers as well, helping them preserve the components themselves. - March 22, 2016 - Stephens Gaskets
Laboratory Testing Inc. Appoints Machine Shop Manager
Third-generation family member, Brad McVaugh, was named Machine Shop Manager at Laboratory Testing Inc. He oversees the machining of test specimens required for mechanical testing and metallography, and sample preparation for ICP analysis. - March 16, 2016 - Laboratory Testing Inc.
New Elesa Catalogue Brings Together Industrial Handles for Special Applications
The new “Handles for Special Applications” catalogue from Elesa includes many designs of bridge handles, tubular handles, luggage handles, flush handles, inset handles, locking handles and interlock handles with either inbuilt safety or indicator micro-switch, suitable for personnel and machine protection. - March 06, 2016 - ELESA (UK) Ltd
New 180 Degree Polyamide Hinges from Specialists FDB Panel Fittings
FDB Panel Fittings have introduced the EMKA 1110 polyamide hinges to their range. These hinges permit rapid door mounting and demount by use of a removable hinge pin which also locks the hinge into place and are considered suitable for batch or continuous production of specialist enclosures. - March 04, 2016 - FDB Panel Fittings
New IP65 Flush Fit Compression T Bar Latch from Elesa
New flush mounting CSMH compression latch from Elesa with pop-out T bar handle and IP65 protection from dust and water ingress. The CSMH is suitable for applications on power generation or HVAC equipment, as well as machine controls and power distribution panels. - February 28, 2016 - ELESA (UK) Ltd
Laboratory Testing Inc. Exhibiting at NACE Corrosion 2016 in Booth #942
Laboratory Testing Inc. will display corrosion testing services in Booth #942 during the NACE Corrosion 2016 Exposition. The show will take place at the Vancouver Convention Center in Vancouver, Canada on March 7-10, 2016. LTI offers a full array of corrosion analysis and testing to determine the susceptibility of materials to corrosion, to identify corrosive agents and more. - February 24, 2016 - Laboratory Testing Inc.
New Lifting Lock Pins from Elesa
GN 1130 lifting lock pins from Elesa are suitable for the secure lifting of goods and equipment on a permanent or temporary basis with fast removal when required. - February 19, 2016 - ELESA (UK) Ltd
Fastener Testing Article from Laboratory Testing Inc. Published by American Fastener Journal
American Fastener Journal published an article from Laboratory Testing Inc. in the January/February 2016 issue entitled “Verifying Quality and Reliability with Fastener Testing.” The article discusses the value of raw material and finished fastener testing in ensuring their safe and reliable use. - February 19, 2016 - Laboratory Testing Inc.
New EMKA 125° Pin Hinge with Stud Fixing and Retained Pivot for Cabinets and Enclosures
The new 1031 hinge from EMKA is quick to install with its integral stud fixing to the cabinet frame. The hinge is expected to be of value to users of cabinets, enclosures and housings for industrial controls or displays where door removal is required in the course of maintenance or re-configuration. - February 05, 2016 - EMKA (UK) Ltd.
New EMKA Quick Fit IP69 Fully Insulated Enclosure Lock
EMKA’s new Program 1000 IP69 lock is a snap together design with exceptional sealing and full electrical insulation. It is suitable for frequent wash down area applications such as those found in food processing situations. - January 23, 2016 - EMKA (UK) Ltd.
Laboratory Testing Inc. Approved as Commercial Testing Laboratory for Sandia National Lab
Commercial Testing Laboratory (CTL) approval was granted to Laboratory Testing Inc. by Sandia National Laboratories. This CTL allows LTI to perform a list of mechanical testing and chemical testing services according to stipulated test methods and specifications. - January 20, 2016 - Laboratory Testing Inc.
Stock and Staffing Expansion at FDB Panel Fittings
FDB are now stocking hundreds of new products, as well as additional stock of popular items serving the specialist panel builder and vehicle transport industries with locks, handles, hinges, cabinet sealing and other enclosure hardware in zinc die, reinforced plastics and stainless steel. - January 16, 2016 - FDB Panel Fittings
New Elesa MO Series Horizontal Toggle Clamps with Anti-Release Trigger
Elesa’s new MO series horizontal toggle clamps feature the MOAS and MOBS stainless steel designs with in-built safety latch which prevents accidental opening when subjected to strong vibrations or side forces. Their low profile is ideal for confined areas and for mounting on expansive flat... - January 10, 2016 - ELESA (UK) Ltd
Metallurgists at Laboratory Testing Inc. Receive GE Certification in Grain Size Evaluation
Two metallurgists from Laboratory Testing Inc. were certified by GE Aviation to perform Grain Size Evaluation. They successfully met the requirements of GE specification S-554 in order to perform evaluations in accordance with GE E50TF133 Issue S10. - January 10, 2016 - Laboratory Testing Inc.
New EMKA Guide to Electronic Locking Systems
EMKA have available a new guide to Electronic Locking and Monitoring Systems which gives an introduction to the rapidly developing field of IT data protection. The guide covers electro-mechanical locking, RFID card, PIN Code and fingerprint Bio-locking technologies. - January 09, 2016 - EMKA (UK) Ltd.
Three Long-Term Employees Retire from Laboratory Testing Inc.
Three Laboratory Testing Inc. employees with over 20 years’ experience recently retired and were recognized for their service at the company’s holiday luncheon. Although officially retired, two continue to work part-time hours at LTI. - January 08, 2016 - Laboratory Testing Inc.
Laboratory Testing Inc. Employee Receives ASTM Analytical Chemistry Committee Award
Lee Dilks, chemistry and metallography manager at Laboratory Testing Inc., received an Award of Appreciation at the ASTM Committee E01 semi-annual meeting for his role as Secretary of subcommittees E01.08 and E01.20. - December 25, 2015 - Laboratory Testing Inc.
FDB to Display Cabinet and Enclosure Hardware Accessories at Southern Manufacturing 2016
FDB Panel Fittings will display their range of cabinet and enclosure hardware accessories for the specialist panel builder at the Southern Manufacturing Exhibition in February 2016. On display will be ¼ turn locks, stainless steel hinges, compression locks, as well as wing and T handles. - December 24, 2015 - FDB Panel Fittings
EMKA Guide for Use, Application and Storage of Closed Cell Self-Adhesive Sponge Rubber
EMKA now have available a guide to processing information for the use, application and storage of closed cell self-adhesive sponge rubber gasket sealing sections which are used in the cabinet, enclosure and motor vehicle industries. - December 20, 2015 - EMKA (UK) Ltd.
Elesa UC Series Flange Mount Shaft Bearings – Self-Align for Easy Fitment
Elesa’s new UC range of self-aligning flange bearings offer easy installation for rotating shafts on equipment such as conveyor systems, where their tolerant fit and protected bearings enable quick, simple assembly or replacement. Natural shaft alignment up to ±2.5 degrees off centre,... - December 19, 2015 - ELESA (UK) Ltd
Giussani Pop-Out T Handles from FDB Panel Fittings
The new Giussani pop-out T handles from FDB Panel Fittings incorporate radial pin tumbler locks and offer the benefits of security with a traditional T style format, now updated to meet modern security and safety concerns. - December 13, 2015 - FDB Panel Fittings
EMKA Guide to Custom Sealing Profiles
The latest EMKA product guide details their in-house production of custom sealing profiles for cabinets, vehicles, HVAC, windows and general industrial purposes. This guide explains the materials they use, along with the processes and machinery which enable them to meet a wide range of... - December 12, 2015 - EMKA (UK) Ltd.
Elesa Bridge Pull Handle with Integrated Micro Switch for Remote Operation
Elesa’s new EBR-SW bridge pull handle enables remote electrical operation of safety interlocking and multiple latching systems while one-handedly opening the related door or safety panel. This is relevant to industrial controls in particular where its IP65 rating also ensures that the EBR-SW... - December 11, 2015 - ELESA (UK) Ltd
VisionASP’s Innovative Technology Solutions Highlighted on Worldwide Business with kathy ireland® Featuring software developed for Vineburg Machining Inc
MMP (USA) announces an exclusive Worldwide Business with kathy ireland® feature story on VisionASP. The story will focus on their innovative approach to technology solutions that put business owners and managers in control of current and future operations. - December 08, 2015 - Vineburg Machining Inc
Laboratory Testing Inc. Announces Continuation of Nadcap Accreditation
PRI has successfully audited Laboratory Testing Inc. of Hatfield, PA for continuation of the Lab’s Nadcap accreditations in Nondestructive Testing Services (liquid penetrant testing, magnetic particle inspection, ultrasonic testing) and Aerospace Quality Systems AC7004. - December 02, 2015 - Laboratory Testing Inc.
EBP Bridge Handles from Elesa with Anti-Microbial and Flexible Features
Elesa’s range of bridge type pull handles in glass fibre reinforced polyamide has two new versions – the .SAN, which provides anti-microbial protection, and the .FLX which has a flexible handle for use on curved surfaces. - November 28, 2015 - ELESA (UK) Ltd
Laboratory Testing Inc. Scheduled to Exhibit at Power-Gen International 2015
Laboratory Testing Inc. will display materials testing, nondestructive testing and failure analysis services in Booth #4645 during the Power-Gen International Expo in Las Vegas, NV on December 8-10, 2015. LTI’s wide-range of testing services are used to inspect construction materials for power sites and to analyze parts that fail. - November 19, 2015 - Laboratory Testing Inc.
Innovative Pneumatic Switch Bridge Pull Handle from Elesa UK
Elesa’s new EBR-PN bridge pull handle enables use of remote air control for interlocking, multiple latching systems etc. where electrical systems are not considered safe or where they may be subject to corrosion. - November 14, 2015 - ELESA (UK) Ltd
Fire Protection Silicone Gaskets from EMKA for Cabinets and Enclosures
The new silicone sealing gaskets for cabinets and enclosures from EMKA offer fire protection to DIN EN 45545-2 and other national/international standards and are suitable for road and rail hazard level applications and for high temperature environments for the protection against ingress of dust and water. - November 13, 2015 - EMKA (UK) Ltd.
Laboratory Testing Inc. Exhibiting at the 2015 Eastern PA Materials Expo
Laboratory Testing Inc. will join other members and guests of the Lehigh Valley Chapter of ASM International at the 2015 Eastern PA Materials Exposition. The event will be held on Thursday, November 12th, 2015 at the Holiday Inn and Conference Center in Breinigsville, PA. - November 06, 2015 - Laboratory Testing Inc.
Laboratory Testing Inc. Article in Forge Magazine
Laboratory Testing Inc.’s outside sales representative, Eric Aparnieks, published an article in the October 2015 issue of Forge. The article entitled “Commercial Testing of Forgings” discusses the principal mechanical properties of interest in the forging industry and the most commonly utilized test methods. - November 05, 2015 - Laboratory Testing Inc.
Giussani Tumbler Lock Pop-Out T Handle Now Available from FDB Panel Fittings
The new P5P and sister P5GP Giussani Pop-out T handles from FDB Panel Fittings offer enhanced security and safety over the traditional T configuration, while retaining the same convenience and integral key tumbler lock system. The recessed handle minimises vandalism opportunities and its low... - November 05, 2015 - FDB Panel Fittings
EMKA Clip-in Pull Handles – for a Quick Sliding Action
New easy fit clip-in recessed pull handles from EMKA for sliding equipment panels or doors, or for light duty lifting, e.g. of storage boxes or portable instruments. - October 25, 2015 - EMKA (UK) Ltd.
New - Vibration Resistant Tensile Compensated Hook Clamp from Elesa UK
This new TLR hook clamp from Elesa is suitable for panels on specialist vehicles such as emergency service or off-road vehicles. They are also useful on packaged equipment which is subject to movement, re-siting and vibration during operation. - October 21, 2015 - ELESA (UK) Ltd
Long and Variable Length Handles and Hand Rails from EMKA
The new 1095 grab rail handle system from EMKA provides very long grab handles, or static hand rails of adjustable lengths, with extra supports for additional strength. They are suitable as grab rails or for guards, covers, inspection panels, e.g. feed guards or heavy machine covers. - October 17, 2015 - EMKA (UK) Ltd.