EMKA recently issued an update on their standard program of low profile swinghandles for enclosures and cabinets covering the benefits of this design technology, these include smooth doors with no marked protrusions offering increased safety as there is no danger of snagging on clothes as people... - December 02, 2023 - EMKA (UK) Ltd.
New stainless steel compression latches to IP65/67 now from the DIRAK/FDB Panel Fittings sales partnership allow flexible use, especially in outdoor situations where their wing knob inserts enable quick and easy operation even with a gloved hand. - November 09, 2023 - FDB Panel Fittings
Electronic locking systems from EMKA are also of value for sectors far removed from electrical and electronic cabinets, in applications such as commercial vehicles and caravan manufacture where they offer a way that closure and locking systems may be completely mounted internally and therefore not visible from the outside. - November 04, 2023 - EMKA (UK) Ltd.
FDB Panel Fittings are pleased to announce that their online store now has an extensive stock of handles for doors, drawers, panels, equipment and cases from a range of manufacturers, in various materials. Handles of this type are often the last component to be fitted and can be needed as a matter... - October 20, 2023 - FDB Panel Fittings
FDB Panel Fittings are pleased to announce a new flush-mounted design of compression rotary latch in stainless steel with precise compression. They are now rated to IP65 and up to IP69K for protection from dust and water. Typically, this series is suitable for doors and panels in public places... - October 14, 2023 - FDB Panel Fittings
EMKA have developed application focussed products for road and rail specialist vehicles such as the Double-Red, ePush and eCam lock mechanisms which are coupled with various stainless steel quarter turn locks and hinges, plus the concealed fitting 180° Gear hinge. - October 14, 2023 - EMKA (UK) Ltd.
New Safety Latch Locks from FDB Panel Fittings enable internal unlocking in the event that a person might accidentally become shut inside housing. - August 17, 2023 - FDB Panel Fittings
FDB Panel Fittings, together with their sales partner DIRAK, now offer a range of clean locking solutions for the secure closure of housings and equipment in the food processing industries. - August 16, 2023 - FDB Panel Fittings
EMKA are constantly developing their portfolio for the HVACR industry and offer special handle systems for air conditioning installations, along with hinges in several variants and a wide range of suitable gasket sections. - August 04, 2023 - EMKA (UK) Ltd.
FDB Panel Fittings announce a new visible 2D adjustable hinge for nested doors from sales partner Dirak which is designed to save time and simplify correct alignment of larger doors. - July 14, 2023 - FDB Panel Fittings
The new Dirak 6-240 over-centre toggle latch in polyamide from FDB Panel Fittings offers a low cost and very quick way to install this convenient unit which can be push fit into matched rectangular pre-punched holes in the frame and door/access panel. - July 01, 2023 - FDB Panel Fittings
EMKA are pleased to announce that their expanding range of extruded gaskets for enclosures and other purposes are now available for sealing of industrial cabinets and enclosures, also for use on commercial and specialist vehicles as well as street furniture. - June 29, 2023 - EMKA (UK) Ltd.
The new Dirak 7-320 series toggle latches announced by FDB Panel Fittings offer secure tightening and locking of twin components in AISI 304 stainless steel. - June 22, 2023 - FDB Panel Fittings
The new DIRAK over-centre toggle latches available from FDB Panel Fittings offer slider release or padlocking operation, and feature a stainless-steel toggle loop. - June 03, 2023 - FDB Panel Fittings
EMKA are pleased to announce a significant new addition to their 2225 locking program. This innovative and flexible lock design program is now available in a miniature format which offers IP66 sealing and accepts many interchangeable locking sets. - May 27, 2023 - EMKA (UK) Ltd.
Components for the Mechanical Engineering Environment and Protective Security Solutions from FDB Panel Fittings
FDB Panel Fittings now offer a full range of DIRAK hardware components for the mechanical engineering environment, and as protective security solutions. - May 20, 2023 - FDB Panel Fittings
These new DIRAK over-centre toggle latches from FDB Panel Fittings offer a high retaining force with low manual effort, simply by tightening two spring loaded components together and locking them: This is what the clip-on PA Over Center Toggle Latch 6-240 provides, plus tool-less installation. The... - April 23, 2023 - FDB Panel Fittings
FDB Panel Fittings announce an innovative new series of leveling feet from Dirak for machines, instruments, conveyor systems, work tables, furniture, and fluid process equipment. - March 24, 2023 - FDB Panel Fittings
Standard Cams from FDB Panel Fittings Now Available Ex-Stock in Double and Triple Point Designs for Rod Systems
FDB Panel Fittings make the installation of cabinet hardware simple and efficient by offering a wide range of standard ex-stock cams and rod sets in single, double and triple point configuration. - February 14, 2023 - FDB Panel Fittings
The new 1056 180 degree screw-on hinge without hinge pin from EMKA suits flush mounted doors, enables lift off door operation and may be interchanged with the existing 1056 design with no need to modify drawings or production. - February 02, 2023 - EMKA (UK) Ltd.
In considering hardware for electronic enclosures and cabinets, FDB Panel Fittings have seen an increasing need for end-user applications involving more secure closure of data cabinets and modules. - January 19, 2023 - FDB Panel Fittings
Compression Latches Delivered Assembled Up to IP67 - Stainless Steel, Matched with Inserts, Bodies and Cams, with Rocfast
The FDB Panel Fittings Rocfast assembly and logistics service for compression locks enables correct and time saving assembly of compression locks with inserts, bodies and cams ready for instant installation to the cabinet of choice. - December 22, 2022 - FDB Panel Fittings
The selection of ex-stock cams available from the FDB Online store can make the task of selecting the correct cam for a lock mechanism to match the depth of door frame more straightforward. - December 17, 2022 - FDB Panel Fittings
The new emergency hammer from EMKA for railway vehicles is now also offered with integral theft resistance, and is compliant with DIN EN 45545-2 HL3. This robust product has been developed specifically for rail vehicles where the safety demands are exceptionally high. - December 16, 2022 - EMKA (UK) Ltd.
EMKA are delighted to announce their program of visible and non-visible hinges for flush enclosure doors. Flush doors often require hinges which are hidden or have hidden fixings for greater security so as to eliminate or conceal an obvious target area. Flush door design is inherently security... - December 08, 2022 - EMKA (UK) Ltd.
New Dirak iLOQ S50 Half Cylinder Swinghandle, from FDB Panel Fittings, Addresses Remote Installation Secure Access
The new RC2 handle available from FDB Panel Fittings has been developed to accommodate the new iLOQ S50 half cylinder for the electronic locking of cabinets. The RC2 handle is safety-tested to DIN EN 1630 RC2 and is protected against unauthorized access while being dustproof and watertight to IP65. - December 04, 2022 - FDB Panel Fittings
Hinges for prominent doors from EMKA include the facility for up to 180 degrees opening when adjacent to another door, giving full access without needing to remove the door. - November 23, 2022 - EMKA (UK) Ltd.
The FDB Online store now offers a wide and expanded range of bridge handles to suit the needs of machine manufacturers who need ex-stock supply for urgent delivery. - November 19, 2022 - FDB Panel Fittings
FDB Panel Fittings now offer a select range of camlocks on their online store for enclosures, lockers, equipment cases and similar in 11mm, 16mm and 20mm sizes. - November 06, 2022 - FDB Panel Fittings
Enclosure hardware manufacturers EMKA are pleased to offer their specialist program of robust Torque Friction Hinges which can serve the function of a door stay and beneficially save the cost and installation of a separate stay component. - October 21, 2022 - EMKA (UK) Ltd.
Long-term collaboration bears fruit in the enclosure world where EMKA announce their newly designed handle with changeable lock inserts for Italian control cabinet manufacturer MPGAMMA. - October 09, 2022 - EMKA (UK) Ltd.
Enclosure hardware specialists FDB Panel Fittings now offer high quality quarter-turn lock/latches at their online store in wing format. This convenient wing handle or wing knob design facilitates improved manual operation on small, e.g. wall mounting enclosures, or may be used in pairs for larger... - September 30, 2022 - FDB Panel Fittings
The new Dirak Hinged Recessed Handle available from FDB Panel Fittings is intended for use in applications such as the construction of specialist road and rail vehicles. - September 28, 2022 - FDB Panel Fittings
The FDB Online store now includes a full assembly provision to supplement the standard component offering of quarter turn locks to IP65/67. This FDB Rocfast service ensures that customer locks are correctly assembled to ease and speed installation of enclosure and cabinet doors, during production... - August 30, 2022 - FDB Panel Fittings
EMKA recently announced that they are one of the top three mould makers in Europe – producing 900 moulds a year for plastic injection, e.g. polyamide/glass and Grivery, as well as zinc and aluminium die casting. This is especially of interest to UK companies because of the many advantages to... - August 21, 2022 - EMKA (UK) Ltd.
IP65 Spanner locks are offered ex-stock from the FDB Online store in 3mm, 5mm, 7mm and 8mm sizes to signify the size of the central pin in each case. Bodies are zinc die with chrome or black finish and cams are flat as standard but may be varied on request. - August 12, 2022 - FDB Panel Fittings
EMKA’s folding T handle expanded range to IP65 now encompasses zinc die and stainless steel manually lockable units with high security automotive barrels, as well as a padlockable version and an electro-mechanical central locking system. - August 05, 2022 - EMKA (UK) Ltd.
Bridge Handles Moulded and Stainless Steel Now Available Ex-Stock and Online from FDB Panel Fittings
FDB Panel Fittings now offer different configurations of Bridge handles ex-stock through their Online shop. - July 24, 2022 - FDB Panel Fittings
EMKA Develop Precision Fit Closure Technology for New Modular Control Cabinets from Robotics and Automation Group KUKA
KUKA is currently starting series production of their new modular control cabinets with parts supplied by EMKA. - July 21, 2022 - EMKA (UK) Ltd.
FDB Panel Fittings offer concealed, internal hinges from Pinet with parallelogram links as typically used in small cabinets or wall-mounted enclosures. These hinges are now available to buy from their online store. - July 01, 2022 - FDB Panel Fittings
EMKA recently had the opportunity to develop locking technology equipment for leading enclosure OEM Rittal, who completely relaunched their range of small and compact enclosures with the new AX and KX series. - June 23, 2022 - EMKA (UK) Ltd.
Nanostructured Zinc Nickel Coating System for Oil and Gas Industries Designed to Replace Cadmium, PTFE & Ceramic-Metallic Coatings
ZNnGard™ (`zen·gärd), a Zinc-Nickel nanostructured electroplating system that is considered part of an overall strategy to replace cadmium, PTFE, ceramic metallic, and fluoropolymer processes, eliminate environmental and worker safety issues while significantly improving performance and reducing life-cycle costs. - June 22, 2022 - Sigma Fasteners, Inc.
Rectangular cut sheet or extruded gasket sections from the FDB Online store offer a simple enclosure door sealing solution. - June 18, 2022 - FDB Panel Fittings
Clip-on profiles now available from the FDB Online store combine the characteristics of edge protection profiles and sealing profiles. Their Clip-on design enables quick and convenient installation to provide effective enclosure sealing when fitted to a flange edge. - May 25, 2022 - FDB Panel Fittings
EMKA can offer standard enclosure hardware for multiple sectors, including mechanical engineering, data centre security, industrial enclosures and cabinets, HVACR, specialist vehicles and railways. - May 07, 2022 - EMKA (UK) Ltd.
The new DIRAK swinghandle with combination lock and key cylinder from FDB Panel Fittings provides the benefit of two factor mechanical authorisation, along with IP65 sealing protection for installations where extra security is required. - April 28, 2022 - FDB Panel Fittings
Hardware components from EMKA close the entrance doors, flaps, and entrances to the engine compartment on the luxury AV2 high speed water transport shuttle boats. - April 22, 2022 - EMKA (UK) Ltd.
Now available from the FDB Online store are their stainless steel continuous/piano hinges in 1800mm lengths with 30 mm and 25 mm widths to provide full height support for heavy panels. Because they are fixed along the whole length of a door, they augment the rigidity of large panels and distribute... - April 15, 2022 - FDB Panel Fittings
The Low Power Outdoor handle was developed by EMKA for control cabinets or telecommunications enclosures and will only allow access to authorised persons. - March 30, 2022 - EMKA (UK) Ltd.
Bullet style, or otherwise “corner” or “torpedo” hinges, are now available from FDB’s online store and provide an industrial-style aesthetic that allows a large door with a narrow frame for excellent space-saving and easy lift-off door removal. - March 24, 2022 - FDB Panel Fittings