New DIRAK Multi-Point Locking from FDB Panel Fittings - Ensures Uniform Sealing, Resists Unauthorised Opening of Large Cabinets

The new DIRAK 90° rod redirect adapter from FDB Panel Fittings can provide five points of closure, or potentially more if required, on large doors on electrical or electronic cabinets in industrial applications. - August 02, 2020 - FDB Panel Fittings

Coronavirus Equipment Hardware Components from EMKA

EMKA can supply suitable hardware from stock for applications in the healthcare sector which call for hardware such as quarter turn locks. - July 30, 2020 - EMKA (UK) Ltd.

Challenge Europe Announce Manufacturing Partnerships for Threaded Fasteners

Challenge Europe are delighted to announce their partnership capabilities for sourcing and supply chain management of threaded fasteners on a specialist basis. - July 26, 2020 - Challenge (Europe) Ltd

Elesa Support COVID Security with Screen Mounting Clamps for Shops and Industrial Safety

Elesa’s Panel Support Clamp range offers a quick and robust solution to the construction of safety screens manufactured in acrylic or other materials. - July 25, 2020 - ELESA (UK) Ltd

New Vandal-Resistant 180° Stainless Steel Hinge from FDB Panel Fittings

The new DIRAK stainless steel hinge from FDB Panel Fittings offers increased protection against unauthorised access due to its specific design and construction. - July 24, 2020 - FDB Panel Fittings

New Pneumatic Fastening Clamps from Elesa UK Speed the Manufacturing Processes

Elesa launch their new MM range of pneumatic clamps, offering fast repetitive clamping cycles on manual or automated production lines to aid achievement of lower costs and more efficient output. - July 18, 2020 - ELESA (UK) Ltd

Edge Protectors from EMKA UK Protect Edges and People

Extruded edge protectors from EMKA UK are now offered in a wide range of sizes using spring steel spines within PVC or EPDM sheaths, so ensuring a firm grip. Sections in fire grade EPDM are also available. Self-locking “U” sections are ideal for covering of potentially sharp metal or... - July 16, 2020 - EMKA (UK) Ltd.

Challenge Europe – Wire Thread Inserts for High-Strength Threads in Soft Materials

Challenge Europe announce their stock, advice and production service operation for a comprehensive range of wire thread inserts, available in both tanged and tangless variants. - July 10, 2020 - Challenge (Europe) Ltd

Ergostyle® Components for the Office Equipment Industry Now Available from Elesa

The Ergostyle® range of standard components available from Elesa has been specifically designed with the modern office environment in mind, including adjustable handles and levelling feet. - June 18, 2020 - ELESA (UK) Ltd

EMKA UK Address the Medical Device Industry with Stainless Steel Hardware

EMKA UK have good stocks of hardware including 316 grade stainless steel items for general medical equipment or devices – ideal for hospital use, as well as for food processing. - May 23, 2020 - EMKA (UK) Ltd.

Industrial Magnets from Elesa UK – A New Take on Many Options for Positioning, Clamping and Retention

Elesa have revised their extensive range of high-quality industrial magnets for use in positioning and clamping applications across almost all industries, from mining to food processing and machining to farming. With high pull force and many shape options available in different alloys, these... - May 16, 2020 - ELESA (UK) Ltd

New Stainless Hinge from DIRAK and FDB Panel Fittings

The specialist team of DIRAK and FDB Panel Fittings are pleased to launch their new 180° stainless steel hinge for specialist cabinets where corrosion-resistance and robust service performance are defined requirements. - May 14, 2020 - FDB Panel Fittings

Challenge Europe – Ex-Stock Threaded Fasteners for Challenging Times

Challenge Europe are pleased to announce that they have good stocks of threaded fasteners so that customers can be assured of robust supply, especially important at this time of general lock-down when it may be difficult to access many existing channels, and will be just as important when urgent demand is felt in the recovery phase. - May 13, 2020 - Challenge (Europe) Ltd

Challenge Europe Discuss the Risks of Reliance on the Automatic Specification Selection Feature in CAD Systems

Challenge Europe come across the risks of excessive reliance on the automatic specification selection feature in many CAD systems at the design stage which focuses on the need to consult a specialist fastener supplier, especially regarding subcontract assemblies, since it may be that they cannot actually comply with the original drawing. - May 01, 2020 - Challenge (Europe) Ltd

Lighting Industry Components - Elesa Focuses on Standard Mounting Elements

Standard components manufacturer Elesa can provide ex-stock fixing elements for the lighting industry which needs to deal with a huge range of mounting, adjustment and dismounting requirements. - April 25, 2020 - ELESA (UK) Ltd

Elesa Expands High-Performing SAN (Sanitary) Components Range for Hygiene Environments

Elesa UK has expanded their range of SAN (sanitary) handles, knobs, levers, clamping handles for hand-operated equipment in medical/bio-chemical and laboratory environments, including disability aids, food processing and pharmaceutical, catering and public fittings. - April 23, 2020 - ELESA (UK) Ltd

New DIRAK Swinghandle Cam Mounting from FDB Panel Fittings

The DIRAK Swinghandle system from FDB Panel Fittings is now enhanced with the introduction of their 3-440 Bearing Plate RS bases. These intermediary mounting accessories enable use of swinghandles with a single point polyamide latching cam or alternatively with standard cam and multi-point rod... - April 10, 2020 - FDB Panel Fittings

EMKA Compression Latches Offer Special Performance for Standard Applications

Market leaders EMKA are delighted to announce that their compression latch technology continues to be applied to standard products, so increasing the performance available for standard applications in arduous environments – e.g. to IP69 where needed. EMKA compression latches enhance sealing... - April 01, 2020 - EMKA (UK) Ltd.

New from FDB Panel Fittings - DIRAK IP65 Swinghandle for Flat Rod Systems

The new DIRAK 3-149 swinghandle from enclosure hardware specialists FDB Panel Fittings is a low-profile IP65 locking handle which facilitates fitment of flat rod multi-point closure systems. The swinghandle/flat rod approach especially suits larger door cabinets which need the additional rigidity... - March 25, 2020 - FDB Panel Fittings

Challenge Europe Discuss the Future of Machine Screws

Challenge Europe discuss the development of machine screws and look to the future, foreseeing better production technologies and higher performance. - March 23, 2020 - Challenge (Europe) Ltd

New Lift-Off 180° Cabinet Hinge by DIRAK from FDB Panel Fittings

The new 180-degree opening, lift-off DIRAK hinge from enclosure hardware specialists FDB Panel Fittings offers a convenient and robust solution to the problem of how to comfortably lift-off a cabinet door for installation or maintenance. This new hinge, with steel frame component which matches a... - March 13, 2020 - FDB Panel Fittings

Elesa – New Expanded Catalogue and E-Commerce Website

New expanded catalogue and e-commerce website from Elesa UK with over 5000 new product codes and updated product groups. - March 06, 2020 - ELESA (UK) Ltd

EMKA Latch Locks for Special Sectors by Industry Application – 2020 Catalogue

Locks and Latches from EMKA for railways, HVAC, hygiene areas and caravans/mobile homes and trailers can be seen in their new 2020 catalogue, also online. - March 05, 2020 - EMKA (UK) Ltd.

New DIRAK Cabinet L-Handle from FDB Panel Fittings

This new DIRAK enclosure handle in traditional L format from sales partner FDB Panel Fittings incorporates many features in one simple product. - February 23, 2020 - FDB Panel Fittings

Challenge Europe Discuss the Differences Between Thread-Forming Screws and Self-Tappers

Challenge Europe explain the differences between thread-forming screws and self-tappers, along with industrial application and best practice. - February 20, 2020 - Challenge (Europe) Ltd

Updated DIRAK Lift-off Corner Hinge Now Available from FDB Panel Fittings

The latest updated version of DIRAK’s lift-off corner hinge for surface mounted doors is available from FDB Panel Fittings. This traditional “bullet” design is aesthetically compatible with general industrial/office cabinet environments and incorporates a Teflon load-bearing washer which provides a reliable, durable, smooth action. - February 08, 2020 - FDB Panel Fittings

Quarter-Turns from EMKA - Simple Latches Through to Keylocks Requiring Just a Quarter-Turn to Operate

EMKA discuss the different types of quarter-turn latches available from them on an ex-stock basis - quick to fit and quick to operate latch locks which suit factory to office, computer room to laboratory where quarter-turns are a simple and low-cost latching and locking system. - February 06, 2020 - EMKA (UK) Ltd.

Elesa Announces Production Industry Service Focus on the Furniture Industry

Elesa can offer a global systematised approach to meet the needs of furniture production from machining/assembly to incorporation at component level and installation, e.g. siting, levelling and adjustment. - February 05, 2020 - ELESA (UK) Ltd

New DIRAK Quarter-Turn Hygiene Latch from FDB with SW13 Insert, Also Red or Blue Colour Coded O-ring

The new hygiene quarter-turn latch from FDB with two coloured O-rings will prevent accumulation of dirt deposits and penetration of liquids under pressure wash conditions. - February 01, 2020 - FDB Panel Fittings

New from FDB - DIRAK Rod Latch System Helps Panel Builders and Installers

The new DIRAK rod latch kit from FDB Panel Fittings makes short work of installing a multi-point rod lock door closing mechanism, together with a standard quarter-turn latch, offering 2 or 3 point gasket pull-down for medium to large enclosure doors. The simple clip-and-cam fit operation suits dual... - January 18, 2020 - FDB Panel Fittings

Challenge Europe Announce Ex-Stock Star/Multi-Splined (TORX) Drive Screws

Challenge Europe now offers ex-stock Hexalobular Internal Drive screws (generically of the TORX style) as part of their manufacturing supply service. - January 18, 2020 - Challenge (Europe) Ltd

Elesa UK at Southern Manufacturing & Electronics 2020, Farnborough 11-13 February – Stand No. F250

Elesa UK will display their range of high quality machine components at Southern Manufacturing & Electronics Exhibition, 11-13th February 2020. - January 17, 2020 - ELESA (UK) Ltd

Czech CAD Studio Takes Over Hungary's Largest Autodesk Gold Partner

Czech CAD Studio Takes Over Hungary's Largest Autodesk Gold Partner

The company CAD Studio continues its series of acquisitions. Now it expands its international activities by taking over the business of VARINEX’s CAD and GIS services, Hungary's largest Autodesk Gold partner. - January 06, 2020 - CAD Studio

EMKA Hygiene Locks Set High Standards for Food Industry Equipment

EMKA hygiene locks set high standards for food industry equipment with renowned food machinery manufacturer Maschinenfabrik Seydelmann KG. - December 22, 2019 - EMKA (UK) Ltd.

External Hinges from Elesa – Enclosure Doors to Equipment Safety Cut-Off

Elesa is pleased to announce that their broad range of hinges and connection products is continually diversifying to meet customer needs. This wide range of hinges and connections in plastic or metal, extends across standard products in technopolymer and SUPER-technoploymer, aluminium, zinc... - December 21, 2019 - ELESA (UK) Ltd

Earthing and Joining of Enclosure/Cabinet Panels - a Quick and Easy Solution from DIRAK/FDB Panel Fittings

The task of joining metal panels while creating an earth point is made easier with the new grounding cage nut from FDB Panel Fittings which is designed especially for use in electronic equipment, 19” racks, server cabinets and similar. It enables quick, simple joining of panels and creates a... - December 19, 2019 - FDB Panel Fittings

New Emergency Hammer from EMKA - an Indispensable Lifesaver

Emergency hammers are a familiar sight in buses or trains, where they are located ready to use and clearly visible, right next to the windows. EMKA has now introduced a new advance on the traditional design of emergency hammer for breaking tempered and laminated glass, as well as insulating glass. - December 13, 2019 - EMKA (UK) Ltd.

Elesa Opens the Door for Newgate Secure Access Solutions

Elesa UK supply tubular and bridge handles to Newgate for their pedestrian gates and barrier and gate drive units. - December 11, 2019 - ELESA (UK) Ltd

Challenge Europe Offer Five Types of Socket Screws

Production supply specialists Challenge Europe are pleased to offer five types of socket screws from stock to support the engineering/assembly industries. - December 06, 2019 - Challenge (Europe) Ltd

Elesa UK Pushes the Boundaries in the World of Metal Standard Elements

Elesa is well known for high quality technopolymer machine elements and is committed to maintaining the quality aspect of all their products. Many new stainless steel products are listed in the new Elesa 166.1 catalogue supplement. - December 05, 2019 - ELESA (UK) Ltd

Challenge Europe Offer Fastener Sourcing and Supply Chain Service to Engineers

Challenge Europe is delighted to offer a fastener sourcing and supply chain service and advice on specification of fasteners to manufacturing design and production engineers. - December 04, 2019 - Challenge (Europe) Ltd

New PINET 90° Stainless Steel Concealed Hinges from FDB Panel Fittings

Two new 90° opening stainless steel and steel hinges for concealed installation have been introduced by FDB Panel Fittings. - November 30, 2019 - FDB Panel Fittings

EMKA Raises Quality with Gaskets Made of 100% EPDM

EMKA UK is successively converting the material of their self-clamping gasket profiles to single piece mouldings in EPDM (ethylene propylene diene monomer) replacing the previous two-part glued assembly of EPDM and (PVC). This means that EMKA gaskets have a significantly improved quality as the new... - November 28, 2019 - EMKA (UK) Ltd.

Expanding Machine Element Range from Elesa UK - New Catalogue Supplement

Elesa’s range of machine elements is expanding year-on-year and now includes an extensive selection of magnets, grub screws, thrust pads, rings, washers, cam locking levers, roller and ball transfer units, bull’s eye fluid levels, also locking/joining components and vibration-damping elements. - November 14, 2019 - ELESA (UK) Ltd

WestRock Linkx Systems and Elesa Reduce Packaging Machine Change Over Times – Reduce Errors - Giving Repeatable Savings

WestRock Linkx Systems have adopted the Elesa RF wireless electronic position indicator system as a standard option across their range of machines and integrated lines for shelf-ready packaging. - October 26, 2019 - ELESA (UK) Ltd

New DIRAK Slam Latch from FDB Panel Fittings for Sliding Doors and Panels

FDB Panel Fittings has launched a new slam latch with sales partner DIRAK for sliding doors and panels. The latch has been designed for sliding doors used on specialist vehicles, caravans, motorhomes, railways, office cabinets, domestic light doors, cupboards and storage units. - October 25, 2019 - FDB Panel Fittings

New Electromechanical Invisible Locking from EMKA

Externally invisible locking is offered by the new EMKA ePush-Lock, meeting the need for a comfortable non-handle locking system. This flat design style of an internal locking handle is the trend for mobile homes and many other applications where it is advantageous to disguise opening panels. EMKA... - October 24, 2019 - EMKA (UK) Ltd.

New DIRAK Flush Mounted Stainless Steel Compression Latch from FDB Panel Fittings

The new DIRAK compression latch from FDB Panel Fittings meets the need for a flush latch with compression/anti-vibration characteristics often found in rail transport, HVAC and furniture applications. The 7-086 and 7-087 provide discrete closure with visual indicator. - October 11, 2019 - FDB Panel Fittings

New EMKA Stainless Steel Compression Latch Variant for Hygiene Areas and Improved Security

EMKA stainless steel hygiene compression latches now come with both rounded/double flat key insert and a new triangular key insert latch for improved security, which makes this quarter turn program for hygienic areas more secure against unauthorised access. - October 06, 2019 - EMKA (UK) Ltd.

Elesa – Standard Elements at the Advanced Engineering Exhibition, NEC, 30-31 October, Stand No. A2

Elesa UK will feature flagship machine elements at the Advanced Engineering Exhibition 2019, including the LM series stainless steel levelling feet with EHEDG certification, GLA roller slide guides, VB three-arm hand knobs, MVAS safety vertical toggle clamps, and the UC-RF control unit. - September 29, 2019 - ELESA (UK) Ltd

Press Releases 151 - 200 of 742